Norfolk · England

Bath re-enamelling & resurfacing in Edgefield, Norfolk

Full bath re-enamelling and resurfacing at your home in Edgefield, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Edgefield

Keeping it looking good

So the finish stays in good condition for years:

  • Don’t let dyes or oils sit on the finish
  • Leave the bath for the full curing time before using it
  • Stick to gentle, non-abrasive cleaners
  • Wipe the bath dry after use in hard water areas

Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

How we handle bath re-enamelling in Edgefield

When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. We work on acrylic baths, pressed steel baths and cast iron baths, and common reasons people get in touch are several chips and rust patches and an old resurfacing that’s failing.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Area
Edgefield (NR24)
Area hub
Norfolk
Cover
One year on every repair
Price
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

Prices and what affects them

Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:

  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • Where the damage is and how we get to it
  • What the surface is made of

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

How to get a fixed price

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • One picture of the whole bath

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Edgefield: your questions answered

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you cover the whole of Norfolk?

We work UK-wide, and that includes Edgefield. Our prices are the same everywhere.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

What happens next?

We review the photos and send a fixed quote with dates.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

When to call us in Edgefield

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

It’s worth getting a quote if you see:

  • A peeling or bubbling previous coating
  • Thin, worn enamel in places
  • Several chips and rust patches
  • A period or roll-top bath worth keeping

Before booking anyone

  • Whether they match the colour on site
  • Whether there are any call-out or travel charges
  • Who will actually do the work
  • Aftercare advice

How to compare quotes

How the visit works

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. You can expect it to take a full day, and we’ll keep you posted as we go.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Keep a parking space free if you can
  • Mention any parking restrictions or tricky access
  • Clear the area around the damage

Ask for a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed quote

Read more

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Holes rusted through the metal
  • A metal bath with a through crack
  • An acrylic bath that flexes badly underfoot

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths

Should you replace it?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Fixed prices from your photos
  • One visit for most repairs
  • No need to remove anything
  • Same prices wherever you are

Read our full price list and guide to resurfacing and replacement costs.

Covering Edgefield

Edgefield is about 12 miles west of North Walsham, in Norfolk. Jobs in Edgefield are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Edgefield is one of 797 places in Norfolk where we work.

Here we cover the NR24 postcode area. You will find streets such as Norwich Road, Canon Marcon Way and Rectory Road, all of which we cover. Neighbouring places we cover include Hempstead (1 mile north), Plumstead (2 miles east), Baconsthorpe (2 miles north-east), Little Barningham (3 miles east) and Saxthorpe (3 miles south). Larger places within reach include Dereham (15 miles south-west), North Walsham (12 miles east), Sheringham (6 miles north-east), Taverham (13 miles south), Cromer (9 miles north-east) and Fakenham (11 miles west).

Near you in Edgefield

Locally, our jobs take us to homes close to Church of St Peter and St Paul, among other places. Well-known places in the area include Hunworth Castle Hill (1.5 miles west) and William Marriott Museum (3.1 miles north). Open spaces near Edgefield include Kelling Heath.

Map of Edgefield © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.