Shropshire · England
Bath Re-enamelling in Edgton
Full bath re-enamelling and resurfacing in Edgton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Thin, worn enamel in places
FAQs for Edgton
Do you work in Edgton?
Yes, we do. We send a technician to Edgton for every job, with no extra charge for travel.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
How do I get a price for bath re-enamelling in Edgton?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
About our bath re-enamelling in Edgton
We do not move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the following day. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are lots of chips and rust spots and worn patches where water runs and sits.
Big or small, it’s backed by a one-year guarantee in Edgton and across Shropshire.
- Location
- Edgton (SY7)
- County
- Shropshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Landlord and trade work in Edgton
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Edgton
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Looking after it afterwards
To keep it looking its best for years:
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs straight away
- Have chips seen to early
- Keep suction mats out of the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
About Edgton
Edgton is about 11 miles north-west of Ludlow, in Shropshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Edgton is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 43 miles away.
Jobs in SY7 are booked in the same way as anywhere else. We also travel to Basford (1 mile south-east), Round Oak (1 mile south-east), Lydbury North (2 miles west), Aston on Clun (3 miles south) and Long Meadowend (3 miles south-east). Larger places within reach include Ludlow (11 miles south-east), Church Stretton (6 miles north-east), Bayston Hill (15 miles north), Craven Arms (3 miles south-east), Bishop's Castle (4 miles north-west) and Pontesbury (13 miles north).
Landmarks near Edgton
We visit homes around Church of St Michael and the streets around them. Edgton’s nearest station is Broome station, about 3.1 miles south of the centre. Nearby you will also find Land of Lost Content (3.5 miles south-east) and Edgton Ring-Motte (less than half a mile south). For a walk, there is Burrow.
What we do, step by step
We agree an arrival time beforehand. On site, it takes most of the day. We leave the room clean and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
Signs you need bath re-enamelling in Edgton
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Most people get in touch after spotting one of these:
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
Before booking anyone
- How the room is protected while they work
- How the colour is matched
- Whether the price is fixed and includes VAT
- Whether the price covers travel
What else we do in Edgton
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Edgton. The price reflects:
- Whether we combine several jobs
- Where the damage is and how we get to it
- The size and number of damaged areas
- The type of damage
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
