Shropshire · England
Bath Re-enamelling for Round Oak homes
We travel to Round Oak for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Signs you need bath re-enamelling in Round Oak
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for any of the following:
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Before booking anyone
- Whether they match the colour on site
- How the room is protected while they work
- What prep work is covered
- Whether the price is fixed and includes VAT
Bath re-enamelling at your home in Round Oak
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair cast iron baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are a dull, rough surface that won’t come clean and staining under the taps and around the waste.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Round Oak (SY7)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Round Oak?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Round Oak
- Colour mixed on the day to match
- Most jobs done in one visit
- Everything repaired in place
- Straight answers about what a repair can do
See our pricing or resurfacing vs replacement cost guide.
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
What we do, step by step
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we’ll tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
Ask for a price
For a price in Round Oak, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
Places near Round Oak
Other services in Round Oak
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- How many items we do on one visit
- How easy the damage is to reach
- The colour and finish to match
- Whether old repairs or coatings need taking off
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
For landlords and businesses
Landlords, letting agents and housing providers in Round Oak use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Round Oak and nearby
Round Oak is about 18 miles south of Shrewsbury, in Shropshire. Our repair technicians come to clients in Round Oak and the surrounding area, so there is no workshop to go to. Round Oak is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Round Oak to Birmingham (42 miles away).
Jobs in SY7 are booked in the same way as anywhere else. We also travel to Basford (1 mile north-west), Long Meadowend (2 miles south-east), Aston on Clun (2 miles south), The Grove (2 miles east) and Wistanstow (2 miles east). Larger places within reach include Ludlow (10 miles south-east), Church Stretton (7 miles north-east), Bishop's Castle (5 miles north-west), Pontesbury (13 miles north), Clun (7 miles south-west) and Minsterley (13 miles north).
Near you in Round Oak
In Round Oak, that means homes near Church of St Michael, among other places. The closest station to Round Oak is Craven Arms station, roughly 2.3 miles south-east. Nearby you will also find Land of Lost Content (2.6 miles south-east) and Edgton Ring-Motte (0.9 miles north-west). Not far away are Burrow.
Questions from Round Oak
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you cover Round Oak?
Yes, we do. Repair technicians travel to Round Oak from across the region, with no extra charge for travel.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your SY7 postcode.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
