Bolton · England
Bath Re-enamelling for Edgworth homes
Full bath re-enamelling and resurfacing for homes and businesses in Edgworth and across Bolton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Repair or replace in Edgworth?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Why us?
- A fixed quote before booking
- Honest advice, even when it means no job
- Everything repaired in place
- Colours mixed by hand to suit your surface
Take a look at our prices page and bath cost comparison.
How we handle bath re-enamelling in Edgworth
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on acrylic baths, pressed steel baths and basins & shower trays, and the jobs we see most are worn patches where water runs and sits and stains that won’t shift.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Edgworth (BL7)
- County
- Bolton
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Where the damage is and how we get to it
- Whether we combine several jobs
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
When you take your pictures, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
Most customers in Edgworth get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Nearby places to Edgworth
What else we do in Edgworth
Do you need bath re-enamelling in Edgworth?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
You may need us if you’ve spotted:
- An outdated colour you’d like to change
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
- A roll-top that’s seen better days
Comparing quotes
- What the guarantee covers, and for how long
- What preparation is included
- What aftercare is recommended
- How long it needs to cure
How to care for the repair
Nothing complicated is needed:
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
How it works
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a full day. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Covering Edgworth
Edgworth is about 3 miles west of Ramsbottom, in Bolton. From the centre of Edgworth to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 61 towns and villages across Bolton, from the larger towns to small villages. Our jobs stretch from Edgworth to Manchester (about 14 miles away).
We work across BL7 and the streets around it. Streets in the area include Moorfield, Heatherfield and Crown Point, all of which we cover. Neighbouring places we cover include Turton Bottoms (1 mile south), Edgworth Moor (1 mile north), Hawkshaw (2 miles south-east), Affetside (2 miles south-east) and Holcombe (3 miles east). Larger places within reach include Bolton (5 miles south), Horwich (7 miles south-west), Halliwell (4 miles south-west), Farnworth (7 miles south), Westhoughton (9 miles south-west) and Daubhill (6 miles south).
What’s near Edgworth
Our clients here include homes close to St James Mission Church, Turton High School Media Arts College and Jumbles Country Park. Nearby too are Chetham Arms (0.8 miles south-west) and Turton and Edgworth CofE/Methodist Controlled Primary School (within half a mile south). The closest station to Edgworth is Entwistle station, roughly 1 mile north-west of the centre. A little further out are Hall Ith Wood Museum (3.4 miles south) and Blair Hospital (2.2 miles south-west).
Your questions about bath re-enamelling in Edgworth
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Do you come to Edgworth?
Yes. We cover the entire UK and come to Edgworth. Send pictures and we will quote, or call 0345 017 0787.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can you repair something that is been repaired before?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
About our accreditations · Every repair comes with a one-year guarantee.
