Somerset · England
Bath re-enamelling & resurfacing in Edington, Somerset
Bath re-enamelling in and around Edington: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
Bath re-enamelling in Edington, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. If you are dealing with chips and rust in more than one place and thin, worn enamel in places, we can usually put it right, on Victorian roll-tops, pressed steel baths and cast iron baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Edington (TA7)
- Region
- Somerset
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Edington. The price depends on:
- How many areas need work
- How easy the damage is to reach
- The type of damage
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
Getting a price from photos
Phone pictures are fine. Just ensure we can see:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- The material, if you know it
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Related advice
Edington and the surrounding area
Edington is about 6 miles east of Bridgwater, in Somerset. Clients in Edington get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover 640 places in Somerset, from the larger towns to small villages.
Our visits in TA7 are booked in the same way as anywhere else. From Church Road, The Walls and Broadmead Lane or a nearby road, a technician can come to you. Nearby, we also work in Catcott (1 mile south-east), Chilton Polden (1 mile west), Sutton Mallet (2 miles south-west), Moorlinch (2 miles south-east) and Shapwick (2 miles south-east). Within a short drive, we also cover Taunton (14 miles south-west), Bridgwater (6 miles west), Burnham-on-Sea (8 miles north-west), Wells (10 miles east), Shepton Mallet (15 miles east) and Street (6 miles east).
Landmarks near Edington
Typical jobs here are in homes near Church of St George, Shapwick School and Leather & Lace pub and the streets around them. Further afield, we also cover the area around Peat Moors Centre (3.4 miles north-east) and Bridgwater Community Hospital (4.3 miles west). The countryside around Edington includes Ham Wall.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Landlord and trade work in Edington
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Edington questions
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work in Edington?
We do. We send a technician to Edington for every job, and the price is the same as everywhere else.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Nearby places to Edington
Also in Edington
What we can’t put right
It helps to know what we can’t do:
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
What we are called out for in Edington
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Before you book anyone
- When it can be used again
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
