Somerset · England
Bath Re-enamelling for Burtle homes
Our technicians come to Burtle for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- Several chips and rust patches
Where we work around Burtle
Burtle is about 6 miles south-east of Burnham-on-Sea, in Somerset. Whether you’re in the middle of Burtle or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Burtle is one of 640 towns and villages in Somerset where we work.
We work across TA7. We regularly work on streets such as Station Road, Robins Lane and Robins Drive. We also travel to Edington (2 miles south), Catcott (2 miles south), Chilton Polden (2 miles south-west), Westhay (3 miles east) and Shapwick (3 miles south-east). Further out, we also cover Taunton (15 miles south-west), Bridgwater (7 miles south-west), Burnham-on-Sea (6 miles north-west), Wells (9 miles east), Shepton Mallet (14 miles east) and Street (7 miles south-east).
Around Burtle
In Burtle, that means homes near Church of St Philip and St James and The Duck pub. Nearby you will also find Peat Moors Centre (2.6 miles east) and Bridgwater Community Hospital (5.5 miles south-west). The countryside around Burtle includes Ham Wall.
About our bath re-enamelling in Burtle
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. If you are dealing with a coloured bath you want in white and an old resurfacing that’s failing, we can help, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Burtle (TA7)
- Region
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Burtle
More services for Burtle
Do you need bath re-enamelling in Burtle?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- An old resurfacing that’s failing
- Wear marks under the taps
- A coloured bath you want in white
What to look for in a quote
- How the room is protected while they work
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we can’t put right
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Burtle questions
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Never use suction bath mats
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What affects the price in Burtle
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- How much damage there is
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your photos
We price nearly every job from photos. This is what we need:
- One sharp close-up of the damage
- Where you are, by postcode
- A photo taken from further back
- What it’s made of, if you know
Send us a picture of the damage and one of the entire item, with your TA7 postcode, and we’ll come back with a fixed quote.
Landlords, agents and businesses in Burtle
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day, including clearing up.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
