Dorset · England
Bath Re-enamelling in Edmondsham
Full bath re-enamelling and resurfacing for homes and businesses in Edmondsham and across Dorset. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
How we handle bath re-enamelling in Edmondsham
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are frequently asked to fix a bath that stays dull however much you clean it and staining under the taps and around the waste, on cast iron baths, Victorian roll-tops and basins & shower trays.
Every repair is covered by our one-year guarantee.
- Area
- Edmondsham (BH21)
- Region
- Dorset
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We are used to working with agents and managing companies. Send the address, pictures and access details.
Repair or replace in Edmondsham?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Edmondsham. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Edmondsham customers choose us
- Work done at your home or business
- Nothing taken out or refitted
- Same prices wherever you are
- Colours mixed by hand to suit your surface
Take a look at our prices page and resurfacing vs replacement cost guide.
What else we do in Edmondsham
Do you need bath re-enamelling in Edmondsham?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Send us a picture if you notice any of these:
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
- A roll-top that is seen better days
- Stains that will not shift
Questions to ask before you book
- How the room is protected while they work
- How changes to the job are handled
- Who will actually do the work
- How long the guarantee is and what it covers
Edmondsham and nearby
Edmondsham is about 2 miles north-west of Verwood, in Dorset. From the centre of Edmondsham to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 462 towns and villages in Dorset, from the larger towns to small villages.
Our visits in BH21 are booked in the same way as anywhere else. Nearby, we also work in Cranborne (1 mile north), Whitmore (2 miles south), Woodlands (2 miles south-west), Wimborne St Giles (2 miles west) and Broxhill (2 miles north-east). We also work in nearby towns such as Christchurch (13 miles south-east), Wimborne Minster (7 miles south), Blandford Forum (11 miles west), Shaftesbury (14 miles north-west), Ferndown (7 miles south) and Broadstone (10 miles south).
What’s near Edmondsham
Around Edmondsham, we work in homes near Emmanuel Middle Church of England Middle School and Church of St Nicholas. A little further out are Cranborne Castle Hill (0.8 miles north).
What we do, step by step
Arrival times are agreed in advance. On site, it takes a full day. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Never use suction bath mats
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
What affects the price in Edmondsham
Prices start from £350. We charge the same across the UK, including Edmondsham. What changes the price is:
- How many areas need work
- The colour and finish to match
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
You can normally get a fixed price without us visiting. To make it quick:
- Any earlier repairs or coatings
- What it’s made of, if you know
- Natural light rather than flash
- A close-up of the damage, in focus
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Common questions in Edmondsham
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
