Hampshire · England
Bath Re-enamelling for Broxhill homes
Damaged bath in Broxhill? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Aftercare tips
How the surface is treated afterwards matters:
- Wash away dyes and oils after use
- Respect the curing time we give you
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Broxhill, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Our repair technicians work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people get in touch are several chips and rust patches and staining under the taps and around the waste.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Broxhill (SP6, BH21)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Broxhill
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
Take a look at our full price list or resurfacing vs replacement cost guide.
Our work in Broxhill
Broxhill is about 3 miles north of Verwood, in Hampshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Broxhill is one of 683 towns and villages in Hampshire where we work.
We work across the SP6 and BH21 postcode area and the streets around it. If you are just outside Broxhill, we cover Alderholt (2 miles east), Damerham (2 miles north), Sandleheath (2 miles north-east), Ashford (3 miles east) and Rockbourne (4 miles north). Within a short drive, we also cover New Milton (14 miles south-east), Ringwood (6 miles south-east), Barton on Sea (15 miles south-east), Ashley (14 miles south-east), Fordingbridge (3 miles east) and St Leonards (6 miles south).
Landmarks near Broxhill
Typical jobs here are in homes near Church of St James, among other places. Nearby you will also find Cranborne Castle Hill (2.1 miles west) and Fordingbridge Museum (3.6 miles east). The countryside around Broxhill includes Blashford Lakes.
Broxhill questions
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Broxhill.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you cover Broxhill?
Yes. We cover the entire UK and come to Broxhill. Send us photos for a fixed quote, or call 0345 017 0787.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
- Let us know if it has been repaired before
Getting a price
If you are in Broxhill and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
What affects the price in Broxhill
Prices start from £350. We do not charge extra for travel to Broxhill. The price comes down to:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Access to the area
- What the surface is made of
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- Details of any past repairs
- Where you are, by postcode
- The material, if you know it
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Towns and villages near Broxhill
What else we do in Broxhill
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Common problems we fix in Broxhill
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
These are the problems we are asked about most:
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Stains that will not shift
What your quote should include
- How long it needs to cure
- A fixed quote, and whether VAT is included
- Whether the price covers travel
- What the guarantee covers, and for how long
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
