Sunderland · England
Bath re-enamelling & resurfacing in Elemore Vale, Sunderland
Damaged bath in Elemore Vale? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
About our bath re-enamelling in Elemore Vale
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair cast iron baths, acrylic baths and pressed steel baths, and people most often call us about enamel that’s lost its shine and feels rough and an outdated colour you’d like to change.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Elemore Vale (DH5)
- Area hub
- Sunderland
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Elemore Vale
Elemore Vale is about 3 miles south-east of Houghton-le-Spring, in Sunderland. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Elemore Vale is one of 75 towns and villages in Sunderland where we work. Our nearest city page is Newcastle upon Tyne, about 15 miles away.
Our technicians cover all of DH5 and the streets around it. Whether you live on James Terrace and Lorne Street or a nearby road, a technician can come to you. Close by, we cover Hetton le Hill (1 mile south-west), Easington Lane (1 mile north-east), Lyons (1 mile north), Low Moorsley (1 mile west) and High Moorsley (1 mile west). Larger places within reach include Sunderland (7 miles north), Washington (7 miles north-west), Houghton-le-Spring (3 miles north-west), Sunniside (8 miles north), Fulwell (9 miles north) and Hendon (7 miles north-east).
Near you in Elemore Vale
In Elemore Vale, that means homes near St Michael's and All Angels, Easington Lane Primary School and Hetton School. Elemore Vale’s nearest station is Seaham station, about 4.6 miles north-east. Nearby you’ll also find Thornlaw (4.5 miles south) and Sherburn Hospital (4 miles south-west). For a walk, there is Warden Law.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before you book. We take into account:
- Previous DIY repairs that have to come out
- The type of damage
- Access to the area
- The size and number of damaged areas
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
How the visit works
Arrival times are agreed in advance. Once we are there, the work takes the best part of a day. The room is left tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Read more
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
FAQs for Elemore Vale
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are there extra charges for Elemore Vale?
Travel is included in the price, and we charge the same wherever you are.
Do you work in Elemore Vale?
Yes. We work across the UK and travel to Elemore Vale and the rest of Sunderland. Send photos and we will quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover the entire of Sunderland?
The whole UK, including all of Sunderland. Send your postcode with your pictures and we’ll confirm dates.
Repair or replace: which is better?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. We charge the same wherever you are, with no extra for Elemore Vale. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- We come to you, anywhere in the UK
- Everything repaired in place
- Colours mixed by hand to suit your surface
- Same prices wherever you are
See our full price list and guide to resurfacing and replacement costs.
Landlord and trade work in Elemore Vale
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
Keeping it looking good
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Nearby places to Elemore Vale
What else we do in Elemore Vale
Honest limits
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Elemore Vale
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
