Staffordshire · England
Bath re-enamelling & resurfacing in Elford, Staffordshire
Problem with your bath in Elford? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
Bath re-enamelling at your home in Elford
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, and can be used again the day after. Whether it’s a dull, rough surface that won’t come clean and a peeling or bubbling previous coating, we can typically put it right, on basins & shower trays, pressed steel baths and acrylic baths alike.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Elford (B79)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Elford
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Keep an eye out for these signs:
- A coloured bath you want in white
- Lots of chips and rust spots
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
Before you book anyone
- Whether a trained technician does the job
- Whether the colour is mixed to match
- How long it needs to cure
- What aftercare is recommended
Why repair rather than replace?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Elford
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Nothing taken out or refitted
See our prices page and guide to resurfacing and replacement costs.
Landlord and trade work in Elford
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Elford: your questions answered
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Our work in Elford
Elford is about 5 miles east of Lichfield, in Staffordshire. Whether you’re in the middle of Elford or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 512 places in Staffordshire. Our jobs stretch from Elford to Birmingham (about 17 miles away).
Here we cover the B79 postcode area. That includes homes on The Square, Church Road and Croft Close and the roads around them. Neighbouring places we cover include Brookhay (2 miles west), Hademore (2 miles south-west), Comberford (2 miles south), Whittington (2 miles south-west) and Huddlesford (2 miles west). Further out, we also cover Burton upon Trent (9 miles north-east), Tamworth (5 miles south), Cannock (12 miles west), Lichfield (5 miles west), Rugeley (10 miles north-west) and Burntwood (9 miles west).
Landmarks near Elford
Our customers here include homes close to The Howard Primary School and St Peter's Church. For rail, the closest station is Lichfield Trent Valley station, roughly 3.4 miles west of the centre. A little further out are National Fairground Museum (3.8 miles south-east) and Samuel Johnson Community Hospital (4 miles west). For a walk, there is Stowe Pool.
Places near Elford
Other services in Elford
What we cannot put right
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Keeping it looking good
Simple care helps the repair last. Our advice:
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which typically takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Let us know about parking or access
- Ensure the room can be ventilated
- Let us know which floor the room is on
How to get a price
To get a price, send two or three pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
