Norfolk · England
Bath Re-enamelling in Elm
Full bath re-enamelling and resurfacing for homes and businesses in Elm and across Norfolk. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Elm
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for wear marks under the taps and several chips and rust patches, on Victorian roll-tops, pressed steel baths and basins & shower trays.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- Elm (PE14)
- County
- Norfolk
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Elm
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Same prices wherever you are
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or bath cost comparison.
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- Any earlier repairs that need removing first
- The material
- How many areas need work
- How hard the colour is to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- The material, if you know it
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Upload a photo of the damage and a wider shot of the whole item, with your PE14 postcode, and we will come back with a fixed quote.
Do you need bath re-enamelling in Elm?
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
Keep an eye out for any of the following:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Wear marks under the taps
- A roll-top that is seen better days
What to look for in a quote
- How your room will be protected
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
- Whether a trained technician does the job
Landlords, agents and businesses in Elm
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Aftercare tips
Simple care helps the repair last. Our advice:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Elm questions
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
What areas do you cover?
Across the UK, and that includes Elm. Prices do not change with location.
Do you work in Elm?
Yes, we do. Repair technicians travel to Elm from across the region, and the price is the same as everywhere else.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Where we work around Elm
Elm is about 2 miles south of Wisbech, in Norfolk. We travel to clients in Elm and the surrounding area, so there’s no workshop to go to. Elm is one of 797 towns and villages in Norfolk where we work. You can also see our page for London, about 79 miles away.
Every address in PE14 is covered. Streets in the area include Grove Gardens, Main Road and Abington Grove, and we cover them all. We also cover the places around Elm: Collett's Bridge (1 mile east), Begdale (1 mile west), Friday Bridge (1 mile south), Paradise (2 miles north-east) and Wisbech (2 miles north). Larger places within reach include King's Lynn (13 miles north-east), Downham Market (9 miles east), Fairstead (14 miles north-east), West Lynn (12 miles north-east), North Lynn (13 miles north-east) and North Wootton (15 miles north-east).
Near you in Elm
Typical jobs here are in homes near Sportsman Public House, Thomas Clarkson Academy and Church of All Saints, among other places. Further afield, we also cover the area around Octavia Hill Birthplace House Museum (1.9 miles north) and North Cambridgeshire Hospital (1.9 miles north).
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes the best part of a day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
- Tell us about any previous repairs or coatings
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
Other services in Elm
About our accreditations · Every repair comes with a one-year guarantee.
