Nottinghamshire · England
Bath Re-enamelling for Elmton homes
Full bath re-enamelling and resurfacing for homes and businesses in Elmton and across Nottinghamshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Bath re-enamelling in Elmton without replacing anything
The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. Common call-outs are for an original cast iron bath that needs restoring and staining under the taps and around the waste, in pressed steel baths, basins & shower trays and Victorian roll-tops.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Elmton (S80)
- Region
- Nottinghamshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Elmton
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for these signs:
- An old resurfacing that’s failing
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
Before you book anyone
- How to look after the finish
- How the room is protected while they work
- A fixed price, and whether VAT is included
- How soon you can use it again
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Also in Elmton
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
About Elmton
Elmton is about 2 miles north-east of Bolsover, in Nottinghamshire. From the centre of Elmton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Elmton is one of 329 towns and villages in Nottinghamshire where we work. We work right across the region, from Elmton to Leeds (about 40 miles away).
Postcode districts we cover here: S80. From Markland Lane and Spring Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Creswell (1 mile east), Oxcroft (1 mile west), Oxcroft Estate (1 mile west), Clowne (1 mile north-west) and Whaley (1 mile south-east). Larger places within reach include Mansfield (8 miles south), Worksop (7 miles north-east), Sutton in Ashfield (9 miles south), Retford (13 miles east), Mansfield Woodhouse (7 miles south) and Kirkby-in-Ashfield (11 miles south).
What’s near Elmton
Locally, our jobs take us to homes close to Heritage High School and Church of St Peter and the streets around them. The nearest railway station is Creswell station, roughly 1.4 miles east. Well-known places in the area include Bolsover Hospital (2.2 miles south-west) and Creswell Crags Museum and Heritage Centre (2.3 miles north-east).
FAQs for Elmton
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How much does bath re-enamelling cost in Elmton?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
What areas do you cover?
Everywhere in the UK, Elmton included. There is no extra charge for travel.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why us?
- Nothing taken out or refitted
- Rooms protected and left tidy
- Most jobs done in one visit
- One-year guarantee on every repair
Take a look at our full price list and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- The colour and finish to match
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The material
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- One picture of the whole bath
- One sharp close-up of the damage
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
