Bournemouth · England

Bath Re-enamelling for Ensbury Park homes

Damaged bath in Ensbury Park? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Ensbury Park

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

About our bath re-enamelling in Ensbury Park

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping, in basins & shower trays, cast iron baths and acrylic baths.

Big or small, you get the same one-year guarantee in Ensbury Park and across Bournemouth.

Area
Ensbury Park (BH10, BH9, BH11)
Area hub
Bournemouth
Guarantee
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How to look after the repair

Once the work has cured, treat it gently:

  • Clean with a soft cloth and mild detergent
  • Store bottles off the bath
  • A quick wipe after use keeps limescale away
  • Do not use the bath until it has fully cured

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

Our work in Ensbury Park

Ensbury Park is about 1 mile north-west of Bournemouth, in Bournemouth. Anywhere in BH10, we come to you. We work in all 20 towns and villages across Bournemouth, from the larger towns to small villages.

Postcode districts we cover here: BH10, BH9 and BH11. That includes homes on Namu Road, Green Lane and Hadow Road. Being close to the A347, Ensbury Park is easy for our repair technicians to reach. Other places close to Ensbury Park include Redhill (1 mile north-east), Talbot Village (1 mile south-west), Winton (1 mile south-east), Muscliff (1 mile east) and Northbourne (1 mile north). Within a short drive, we also cover Pokesdown (4 miles south-east), Boscombe (3 miles south-east), West Cliff (3 miles south) and East Cliff (3 miles south-east).

Local landmarks in Ensbury Park

Around Ensbury Park, we work in homes near Church of St Thomas, The Parkstone and Heatherlands pub and Hill View Primary School, among other places. Nearby too are The Bourne Academy (0.5 miles north-west), Glenmoor Academy (under half a mile south) and Fernheath Playing Fields (0.9 miles west). Ensbury Park’s nearest station is Bournemouth station, roughly 2.1 miles south-east of the centre. Further afield, we also cover the area around Bournemouth Transport Museum (2 miles east) and Bournemouth (2.5 miles south). Open spaces near Ensbury Park include St Catherine's Hill.

Map of Ensbury Park © OpenStreetMap contributors

Common problems we fix in Ensbury Park

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

Keep an eye out for any of the following:

  • A coating lifting around the plughole
  • A period or roll-top bath worth keeping
  • Worn patches where water runs and sits
  • Several chips and rust patches

Questions to ask before booking

  • How to look after the finish
  • How your room will be protected
  • Who turns up on the day
  • Whether the colour is mixed to match

Our hiring checklist

How the visit works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can usually be used the day after.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing
  • Keep children and pets away from the room on the day

Getting a price

Upload pictures of the damage and a wider shot of the whole item, and tell us you are in Ensbury Park, and we’ll reply with a fixed price.

Send pictures for a quote

Related advice

Common questions in Ensbury Park

Will there be a smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What happens after I send pictures?

We review the photos and send a fixed quote and the next dates we have.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

How long does re-enamelling take?

Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Will the new finish last?

Look after it and it lasts. Gentle cleaning, no suction mats.

Will there be fumes?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

When we’d advise against a repair

In fairness, there are a few things a repair won’t fix:

  • A bath split right through the body
  • Holes rusted through the metal
  • Acrylic that moves when you stand in it

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Repair or replace in Ensbury Park?

A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Ensbury Park. The job itself decides the price: how much damage, what it’s made of and how many items.

What you get with us

  • Colour-matched on site
  • Every repair guaranteed for a year
  • We come to you, anywhere in the UK
  • No need to remove anything

Read our full price list and guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.