Bournemouth · England
Bath re-enamelling & resurfacing in Redhill, Bournemouth
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Redhill. Free, fixed quotes from your photos.
- Resurfacing from £350
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
The process
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Get a quote
Upload a picture of the damage and one of the whole item, with your BH10 postcode, and we’ll come back with a fixed quote.
Read more
About our bath re-enamelling in Redhill
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. If you’re dealing with chips and rust in more than one place and a coating lifting around the plughole, we can typically put it right.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Redhill (BH10, BH9, BH11)
- County
- Bournemouth
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Redhill
More services for Redhill
When to call us in Redhill
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- Several chips and rust patches
- Wear marks under the taps
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Questions to ask before you book
- How the colour is matched
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Who turns up on the day
Looking after it afterwards
So the finish stays in good condition for years:
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- One visit for most repairs
- We leave the room as we found it
- Repair technicians who travel to you, UK-wide
- Colour-matched on site
Read our pricing or bath cost comparison.
About Redhill
Redhill is about 1 mile north-west of Bournemouth, in Bournemouth. Clients in Redhill get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Our technicians cover 20 places across Bournemouth.
Jobs in BH10, BH9 and BH11 work the same way as everywhere else we cover. Local streets include Park Lane, Green Lane and Abney Road, and we cover them all. Redhill is on the A347, which makes it straightforward to reach. We also cover the places around Redhill: Ensbury Park (1 mile south-west), Muscliff (1 mile east), Talbot Village (1 mile south-west), Northbourne (1 mile north) and Winton (1 mile south). Further out, we also cover Pokesdown (4 miles south-east), Boscombe (3 miles south-east), West Cliff (3 miles south), Westbourne (3 miles south), Lansdowne (3 miles south) and Richmond Hill (3 miles south).
Around Redhill
Typical jobs here are in homes near Fernheath Playing Fields, Hill View Primary School and The Bourne Academy and the streets around them. Nearby too are The Smoking Outlaw pub (0.6 miles north-east), Church of St Thomas (less than half a mile south-west) and Glenmoor Academy (0.7 miles south). The nearest railway station is Bournemouth station, about 2.2 miles south-east of the centre. Further afield, we also cover the area around Castlepoint Shopping Centre (1.9 miles east) and Bournemouth Transport Museum (1.8 miles east). Open spaces near Redhill include St Catherine's Hill.
- Parks and local facilities nearby include Bournemouth (2.8 miles south)
Landlords, agents and businesses in Redhill
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Redhill: your questions answered
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long is the bath unusable?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
