Oxfordshire · England
Bath Re-enamelling for Enslow homes
Fixed-price bath re-enamelling in Enslow and the surrounding area, typically in one visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Enslow
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you are dealing with an old resurfacing that’s failing and wear marks under the taps, we can normally put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Enslow (OX5)
- Area hub
- Oxfordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- How many areas need work
- The colour and finish to match
Our prices are the same across the UK, so there’s no premium for Enslow. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
Two or three clear photos are typically enough. Try to include:
- Your postcode, so we can check dates
- The material, if you know it
- Any earlier repairs or coatings
- A photo taken from further back
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Common questions in Enslow
Do you work in Enslow?
Yes, we do. Technicians travel to Enslow from across the region, and the price is the same as everywhere else.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why Enslow customers choose us
- Dust sheets down, tidy finish
- Most jobs done in one visit
- Honest advice, even when it means no job
- Colour-matched on site
Read our pricing and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Enslow
For anyone letting property in or around Enslow, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Aftercare tips
Simple care helps the repair last. Our advice:
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
More services for Enslow
Covering Enslow
Enslow is about 7 miles south-west of Bicester, in Oxfordshire. From the centre of Enslow to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Enslow is one of 443 places in Oxfordshire we cover. We work right across the region, from Enslow to Birmingham (49 miles away).
We work across the OX5 postcode area. From Station Road, Lince Lane and Ingleby Paddocks or a nearby road, a technician can come to you. Nearby, we also work in Bletchingdon (1 mile east), Kirtlington (1 mile north-east), Hampton Poyle (2 miles south-east), Kidlington (3 miles south) and Weston-on-the-Green (3 miles east). We also work in nearby towns such as Oxford (8 miles south), Banbury (14 miles north), Bicester (7 miles north-east), Abingdon-on-Thames (13 miles south), Witney (10 miles south-west) and Carterton (14 miles south-west).
What’s near Enslow
We visit homes around Bletchingdon Parochial Church of England Primary School, Church of Holy Cross and Rock Of Gibraltar Public House, among other places. Enslow’s nearest station is Tackley station, about 1.5 miles north. Other landmarks nearby include Soldiers of Oxfordshire Museum (2.6 miles west). Open spaces near Enslow include Woodsides Meadow.
What we can’t put right
In fairness, some problems need a different fix:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
Send us photos and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Do you need bath re-enamelling in Enslow?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Comparing quotes
- Whether cleaning and preparation are in the price
- How long it needs to cure
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we’ll tell you if anything changes.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Open a window if you can
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
