Surrey · England
Bath Re-enamelling for Epsom Downs homes
Local bath re-enamelling for Epsom Downs: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Several chips and rust patches
- An outdated colour you’d like to change

Bath re-enamelling in Epsom Downs without replacing anything
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Typical jobs include a coating lifting around the plughole and chips and rust in more than one place, across cast iron baths, pressed steel baths and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.

- Area
- Epsom Downs (KT17)
- Area hub
- Surrey
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from pictures. This is what makes a difference:
- The size and number of damaged areas
- Whether we combine several jobs
- The colour and finish to match
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. We charge the same wherever you are, with no extra for Epsom Downs. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- We leave the room as we found it
- No need to remove anything
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or resurfacing vs replacement cost guide.
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Common questions in Epsom Downs
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Do you cover Epsom Downs?
Yes. We cover the whole UK and come to Epsom Downs. Send us photos for a fixed quote, or call 0345 017 0787.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Do the materials smell?
Expect a mild smell while we’re working.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Nearby places to Epsom Downs
Other services in Epsom Downs
Covering Epsom Downs
Epsom Downs is about 1 mile south-east of Epsom, in Surrey. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Epsom Downs is one of 395 places in Surrey where we work. Our jobs stretch from Epsom Downs to London (14 miles away).
Every address in KT17 is within our area. Local streets include Longdown Lane South, Bunbury Way and Burgh Heath Road, and we cover them all. If you’re just outside Epsom Downs, we cover Nork (1 mile east), North Looe (1 mile north), Great Burgh (1 mile south-east), Tattenham Corner (1 mile south) and Langley Vale (1 mile south-west). Larger places within reach include Guildford (15 miles west), Woking (14 miles west), Horley (10 miles south), Redhill (7 miles south-east), Egham (15 miles north-west) and Reigate (6 miles south).
Landmarks near Epsom Downs
In Epsom Downs, that means homes near Priest Hill, The Beacon School and Parish Church of St Martin and the streets around them. Other local landmarks include Derby Arms (0.7 miles south-west), Laine Theatre Arts (1.2 miles north-west) and Warren Mead Infant School (0.7 miles east). Epsom Downs has its own railway station: Epsom Downs station. Further afield, we also cover the area around Epsom General Hospital (1.3 miles west) and The Ashley Centre (1.3 miles north-west). For a walk, there is Colley Hill and Cuddington Meadows.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
- Fix dripping taps quickly
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Have a window or extractor fan available
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
Landlords, agents and businesses in Epsom Downs
We work for landlords, letting agents and housing providers in Epsom Downs as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
About our accreditations · Every repair comes with a one-year guarantee.

