Lincolnshire · England
Bath re-enamelling & resurfacing in Etton, Lincolnshire
We travel to Etton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
About our bath re-enamelling in Etton
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you’re dealing with an old resurfacing that’s failing and several chips and rust patches, we can generally put it right, on pressed steel baths, acrylic baths and basins & shower trays alike.
Every repair is covered by a one-year guarantee.
- Area
- Etton (PE6)
- County
- Lincolnshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow the best part of a day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear the area around the damage
- Let the surface dry out before the visit
- Point us to the nearest place to park
Ask for a price
Send us a photo of the damage and a wider shot of the whole item, with your PE6 postcode, and we will come back with a fixed quote.
Read more
Looking after it afterwards
Once the work has cured, treat it gently:
- A dripping tap should be fixed promptly
- Do not leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Repair or replace in Etton?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- We leave the room as we found it
See our full price list or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What a repair can’t fix
Before you book, it’s worth knowing the limits too:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Etton
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Nearby places to Etton
Other services in Etton
When to call us in Etton
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Send us a picture if you notice any of these:
- Wear marks under the taps
- Lots of chips and rust spots
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Before booking anyone
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- How the room is protected while they work
- What aftercare is recommended
Covering Etton
Etton is about 5 miles north-west of Peterborough, in Lincolnshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Etton is one of 732 towns and villages in Lincolnshire we cover. You can also see our page for Birmingham, about 67 miles away.
Jobs in PE6 are booked in the same way as anywhere else. We regularly work on streets such as Rectory Lane and Main Road and the roads around them. We also cover the places around Etton: Helpston (1 mile south-west), Maxey (1 mile north-west), Deeping Gate (2 miles north), Deeping St James (2 miles north) and West Deeping (2 miles north-west). Larger places within reach include Spalding (12 miles north-east), Stamford (7 miles west), Bourne (9 miles north), Austerby (9 miles north), Pinchbeck (13 miles north-east) and Paston (4 miles south-east).
Landmarks near Etton
We visit homes around Church of St Stephen, The Golden Pheasant Public House and Peakirk-Cum-Glinton CofE Primary School. Well-known places in the area include Northborough Manor House (1.1 miles north-east) and Edith Cavell Hospital (4.1 miles south). For a walk, there is Deeping Lakes Nature Reserve.
Your questions about bath re-enamelling in Etton
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How do I get a price for bath re-enamelling in Etton?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up and a picture of the whole item with your PE6 postcode.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
About our accreditations · Every repair comes with a one-year guarantee.
