Lincolnshire · England
Bath re-enamelling & resurfacing in Maxey, Lincolnshire
Damaged bath in Maxey? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
How we handle bath re-enamelling in Maxey
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for an old resurfacing that’s failing and a roll-top that’s seen better days, on basins & shower trays, Victorian roll-tops and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Maxey (PE6)
- Area hub
- Lincolnshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Our work in Maxey
Maxey is about 6 miles east of Stamford, in Lincolnshire. Wherever you are in the PE6 postcode area, a technician comes to you. Maxey is one of 732 towns and villages in Lincolnshire we cover. Our jobs stretch from Maxey to Birmingham (67 miles away).
Postcode districts we cover here: PE6. Jobs here include addresses on High Street, Torpel Way and West End Road. We also travel to West Deeping (1 mile north-west), Etton (1 mile south-east), Deeping Gate (2 miles north-east), Market Deeping (2 miles north-east) and Helpston (2 miles south). Further out, we also cover Spalding (11 miles north-east), Stamford (6 miles west), Bourne (8 miles north), Austerby (7 miles north), Pinchbeck (13 miles north-east) and Paston (5 miles south-east).
Near you in Maxey
In Maxey, that means homes near Church of St Peter, The Deepings School and Blue Bell Public House and the streets around them. Further afield, we also cover the area around Maxey Castle (less than half a mile north-east) and Edith Cavell Hospital (5.5 miles south-east). Not far away are Deeping Lakes Nature Reserve.
Should you replace it?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Why Maxey clients choose us
- A year’s guarantee on all work
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- One price list for the entire UK
Take a look at our full price list and guide to resurfacing and replacement costs.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to most of the day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
Other services in Maxey
How we price bath re-enamelling
Prices start from £350. We price every job individually. What matters most is:
- How much damage there is
- Previous DIY repairs that have to come out
- What the surface is made of
- Unusual colours or finishes
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- The material, if you know it
- A wider photo showing the entire bath
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Your questions about bath re-enamelling in Maxey
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens next?
We come back with a fixed quote, usually with dates to choose from. There is no obligation to book.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A metal bath with a through crack
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Landlord and trade work in Maxey
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Do you need bath re-enamelling in Maxey?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The things clients normally mention when they call are:
- An old resurfacing that’s failing
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- An outdated colour you’d like to change
Questions to ask before booking
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
