Northamptonshire · England
Bath re-enamelling & resurfacing in Welton, Northamptonshire
Our repair technicians come to Welton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that is seen better days
- Thin, worn enamel in places
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Bath re-enamelling in Welton, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on pressed steel baths, acrylic baths and cast iron baths, and common reasons people contact us are lots of chips and rust spots and an original cast iron bath that needs restoring.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Welton (NN11)
- Area hub
- Northamptonshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Welton
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- Several chips and rust patches
Questions to ask before you book
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- How your room will be protected
- What aftercare is recommended
Landlords, agents and businesses in Welton
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, with the bath back in use the next day. Prices start from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Fixed prices from your pictures
- One visit for most repairs
- Same prices wherever you are
- Rooms protected and left tidy
Read our prices page and guide to resurfacing and replacement costs.
FAQs for Welton
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What areas do you cover?
We work UK-wide, and that includes Welton. Prices do not change with location.
How do I get a price for bath re-enamelling in Welton?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Do you cover Welton?
Yes, we do. Technicians travel to Welton from across the region, with no extra charge for travel.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
What affects the price in Welton
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- What the surface is made of
- How many areas need work
- The type of damage
- Unusual colours or finishes
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- A photo taken from further back
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Welton and nearby
Welton is about 2 miles north-east of Daventry, in Northamptonshire. Anywhere in NN11, we come to you. Welton is one of 364 places in Northamptonshire where we work. We work right across the region, from Welton to Birmingham (34 miles away).
Jobs in NN11 are booked in the same way as anywhere else. Whether you live on High Street, Station Road and Welton Park or a nearby road, we can come to you. We also travel to Everdon (1 mile south-west), Long Buckby Wharf (2 miles east), Norton (2 miles south-east), Daventry (2 miles south-west) and Drayton (2 miles south-west). We also work in nearby towns such as Northampton (11 miles east), Towcester (13 miles south-east), Moulton (13 miles east), East Hunsbury (12 miles south-east), Wootton (13 miles south-east) and White Hills (10 miles east).
Around Welton
We visit homes around Church of St Martin, Welton Church of England Academy and The White Horse pub, among other places. You’ll also find Daventry Country Park (1.5 miles south) and The Parker E-ACT Academy (1.8 miles south). The nearest railway station is Long Buckby station, roughly 2.7 miles east of the centre. A little further out are Long Buckby (2.9 miles east) and Daventry Museum (2.2 miles south). Open spaces near Welton include Badby Wood and Borough Hill.
What we cannot put right
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Welton
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
What happens on the day
We agree an arrival time beforehand. On site, it takes most of the day for most jobs. The room is left tidy and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
- Open a window if you can
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What else we do in Welton
About our accreditations · Every repair comes with a one-year guarantee.
