Hampshire · England
Bath re-enamelling & resurfacing in Everton, Hampshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Everton. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- The type of damage
- Unusual colours or finishes
- Any earlier repairs that need removing first
- The material
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- Something in shot to show the size
- Your postcode, so we can check dates
- A photo taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
About our bath re-enamelling in Everton
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, and can be used again the day after. Common call-outs are for lots of chips and rust spots and a peeling or bubbling previous coating, on cast iron baths, Victorian roll-tops and pressed steel baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Everton (SO41)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Also near Everton
Other services in Everton
Questions from Everton
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
What happens next?
You’ll get a fixed quote back, usually with dates to choose from. There’s no obligation to book.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a full day. Before leaving, we tell you when it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Related advice
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
When to call us in Everton
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People generally call us after spotting one of these:
- Thin, worn enamel in places
- An old resurfacing that’s failing
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
Questions to ask before booking
- Whether they match the colour on site
- What happens if the damage is worse than the photos show
- Whether the price covers travel
- A fixed quote, and whether VAT is included
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- No extra charge for your area
- No need to remove anything
- A year’s guarantee on all work
- One visit for most repairs
See our prices page and resurfacing vs replacement cost guide.
What a repair cannot fix
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Don’t let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Our work in Everton
Everton is about 2 miles south-west of Lymington, in Hampshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Everton is one of 683 places in Hampshire where we work.
Postcode districts we cover here: SO41. You will find streets such as Old Christchurch Road, Westfield Gardens and Laburnum Drive, all of which we cover. If you’re just outside Everton, we cover Lymore (1 mile south), Milford on Sea (1 mile south), Pennington (1 mile east), Lower Pennington (2 miles east) and Keyhaven (2 miles south-east). Larger places within reach include Totton (13 miles north), Hythe (12 miles north-east), New Milton (3 miles west), Ringwood (11 miles north-west), Warsash (15 miles north-east) and Barton on Sea (3 miles west).
Local landmarks in Everton
Typical jobs here are in homes near Milford-on-Sea Church of England Primary School, The Crown Public House and St Mary's Church, among other places. The closest station to Everton is Lymington Town station, roughly 2.5 miles north-east. A little further out are Yarmouth Castle (4.8 miles south-east) and St Barbe Museum and Art Gallery (2.3 miles north-east). Open spaces near Everton include Milford on Sea LNR.
About our accreditations · Every repair comes with a one-year guarantee.
