Wolverhampton · England

Bath Re-enamelling in Fallings Park

Bath re-enamelling for Fallings Park, without a refit. Send us pictures for a fixed price, then book a visit.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Fallings Park

Do you need bath re-enamelling in Fallings Park?

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Signs it’s time to call us include:

  • An old resurfacing that’s failing
  • Brown or grey marks that do not clean off
  • Enamel that’s lost its shine and feels rough
  • Worn patches where water runs and sits

Comparing quotes

  • Aftercare advice
  • Whether the price covers travel
  • Whether a trained technician does the job
  • Whether the price is fixed and includes VAT

How to compare quotes

Bath re-enamelling in Fallings Park without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a coloured bath you want in white and a coating lifting around the plughole, we can normally put it right, on Victorian roll-tops, pressed steel baths and cast iron baths alike.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Fallings Park (WV10, WV98, WV6)
County
Wolverhampton
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Wash away dyes and oils after use
  • Use washing-up liquid and a soft cloth
  • Respect the curing time we give you
  • Keep suction mats out of the bath

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.

Landlord and trade work in Fallings Park

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

Should you replace it?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.

Why Fallings Park customers choose us

  • Work done at your home or business
  • We leave the room as we found it
  • Nothing taken out or refitted
  • Honest advice, even when it means no job

See our pricing and guide to resurfacing and replacement costs.

Our work in Fallings Park

Fallings Park is about 1 mile north-east of Wolverhampton, in Wolverhampton. Jobs in Fallings Park are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover all 96 towns and villages across Wolverhampton. Our jobs stretch from Fallings Park to Birmingham (13 miles away).

Here we cover the WV10, WV98 and WV6 postcode area. From Park Lane, Luce Road and Fox's Lane or a nearby road, we can come to you. Close by, we cover Gorsebrook (1 mile west), Low Hill (1 mile north), Old Fallings (1 mile north-east), Oxley (1 mile north-west) and Bushbury (1 mile north). Further out, we also cover Bilston (3 miles south-east), Coseley (4 miles south), New Invention (3 miles east), Gornal (5 miles south), Perton (4 miles west) and Tibbington (5 miles south-east).

Local landmarks in Fallings Park

Typical jobs here are in homes near Masons Arms, St Stephen and Woden Primary School, among other places. Also close by are Heath Park School (0.7 miles east), West Park (1.2 miles south-west) and Heath Park (0.7 miles east). The closest station to Fallings Park is Wolverhampton station, about 0.8 miles south of the centre. Other landmarks nearby include St Mary's Hospital (1 mile south) and Bentley Bridge Retail Park (1.1 miles east). Not far away are Peascroft Wood and Beacon Hill.

Map of Fallings Park © OpenStreetMap contributors

What affects the price in Fallings Park

Prices start from £350. Quotes are free and the price is fixed. What we look at:

  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • The material
  • How much damage there is

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:

  • The material, if you know it
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

How the visit works

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day. We leave the room clean and ready to use once it has cured.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s normally ready the day after.

Before we arrive

  • Clear the area around the damage
  • Open a window if you can
  • Mention any earlier repairs or resurfacing

Getting a price

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.

Get a fixed quote

Advice

Honest limits

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Anything hidden under an old coating, until we remove it
  • Acrylic that moves when you stand in it
  • A bath split right through the body

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths

Questions from Fallings Park

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is a repair better than a new one?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is there a smell?

Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.

What happens next?

You get a fixed price and available dates. If we need another angle, we’ll ask.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.