Luton · England
Bath re-enamelling & resurfacing in Farley Hill, Luton
Full bath re-enamelling and resurfacing at your home in Farley Hill, with a one-year guarantee on every repair.
- Resurfacing from £350
- Stains that will not shift
- An outdated colour you’d like to change
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Luton and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Bath re-enamelling in Farley Hill, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Whether it’s an original cast iron bath that needs restoring and an outdated colour you’d like to change, we can typically put it right, on basins & shower trays, Victorian roll-tops and acrylic baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Farley Hill (LU1)
- Area hub
- Luton
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Once the work has cured, treat it gently:
- Don’t use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Our work in Farley Hill
Farley Hill is about 2 miles south of Luton, in Luton. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in all 53 towns and villages across Luton, from the larger towns to small villages. Our jobs stretch from Farley Hill to London (30 miles away).
All of LU1 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Gorse Road, Birch Road and Luton Road. We also cover the places around Farley Hill: Dallow (1 mile north), Woodside (1 mile south), New Town (1 mile east), Park Town (1 mile east) and Caddington (1 mile south-west). We also work in nearby towns such as Crawley Green (3 miles north-east), Ramridge End (3 miles north-east), Bramingham (3 miles north), Limbury (3 miles north), Marsh Farm (3 miles north) and Runfold (3 miles north).
What’s near Farley Hill
Around Farley Hill, we work in homes near Rabia Girls' and Boys' School, Stockwood Park and Our Lady Help of Christians Church. Other local landmarks include The Fountain Public House (0.6 miles north-east), The Stockwood Park Academy (1.1 miles east), Saint John the Baptist (within half a mile north-west) and Farley Junior School (less than half a mile north-east). The closest station to Farley Hill is Luton station, about 1.2 miles north-east of the centre. Further afield, we also cover the area around Mossman Collection (0.7 miles south-east) and Luton Castle (0.8 miles east). Not far away are Warden Hill and Blow's Down.
How it works
Arrival times are agreed in advance, so you’re not left guessing. Once we’re there, the work takes most of the day in most cases. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Ask for a price
Most customers in Farley Hill get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Do you need bath re-enamelling in Farley Hill?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
Questions to ask before you book
- If travel is included in the price
- How long it needs to cure
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
Common questions in Farley Hill
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Repair or replace in Farley Hill?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- We will tell you if it’s not worth repairing
- One price list for the whole UK
- A fixed quote before booking
- CHAS and Constructionline accredited
Read our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Farley Hill. The price reflects:
- Previous DIY repairs that have to come out
- The material
- Doing more than one item at once
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A photo taken from further back
- A clear, close picture of the problem area
Email us photos of the damage and a wider shot of the whole item, and tell us you are in Farley Hill, and we will reply with a fixed price.
Other services in Farley Hill
About our accreditations · Every repair comes with a one-year guarantee.
