Somerset · England
Bath re-enamelling & resurfacing in Faulkland, Somerset
Problem with your bath in Faulkland? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Faulkland, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
About our bath re-enamelling in Faulkland
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a bath that stays dull however much you clean it and a roll-top that’s seen better days, we can help.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Faulkland (BA3)
- County
- Somerset
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Let us know about parking or access
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Honest limits
A repair isn’t right for every job, for example:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Also near Faulkland
Other services in Faulkland
Where we work around Faulkland
Faulkland is about 5 miles east of Midsomer Norton, in Somerset. Anywhere in BA3, a technician comes to you. We work in 640 places across Somerset, from the larger towns to small villages.
Postcode districts we cover here: BA3. Streets in the area include Westmead, Fulwell Lane and Fullwell Close, all of which we cover. We also travel to Buckland Down (2 miles south-west), Laverton (2 miles east), Buckland Dinham (2 miles south-east), Hapsford (3 miles south-east) and Mells (3 miles south). We also work in nearby towns such as Frome (5 miles south-east), Wells (13 miles south-west), Midsomer Norton (5 miles west), Shepton Mallet (10 miles south-west), Radstock (3 miles west) and Castle Cary (15 miles south-west).
Local landmarks in Faulkland
Our customers here include homes close to Church of St Mary, Writhlington School and Hemington Primary School and the streets around them. The closest station to Faulkland is Freshford station, roughly 5 miles north-east of the centre. Well-known places in the area include Hermitage House (4.1 miles north-east) and Paulton Memorial Hospital (5.1 miles west). The countryside around Faulkland includes Orchardleigh Lake and Vallis Vale.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What the surface is made of
- The type of damage
- How many areas need work
- Access to the area
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
You can normally get a fixed price without us visiting. To make it quick:
- One picture of the entire bath
- What it’s made of, if you know
- A clear, close picture of the problem area
- Any earlier repairs or coatings
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Repair or replace in Faulkland?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- One price list for the whole UK
- Most jobs done in one visit
Take a look at our prices page and guide to resurfacing and replacement costs.
Common problems we fix in Faulkland
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
You may need us if you’ve spotted:
- Wear marks under the taps
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
Before you book anyone
- Who turns up on the day
- How the colour is matched
- What prep work is covered
- How changes to the job are handled
Questions from Faulkland
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Which areas do you work in?
We cover the whole UK, including Faulkland and the rest of Somerset. Send your postcode with your photos and we’ll offer you dates.
Do you cover Faulkland?
We do. We send a technician to Faulkland for every job, with no extra charge for travel.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Do not use the bath until it has fully cured
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
