Carmarthenshire · Wales
Bath re-enamelling & resurfacing in Felinfoel, Carmarthenshire
Damaged bath in Felinfoel? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
About our bath re-enamelling in Felinfoel
We do not move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the day after. Typical jobs include a period or roll-top bath worth keeping and thin, worn enamel in places, in basins & shower trays, cast iron baths and pressed steel baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Area
- Felinfoel (SA14, SA15)
- Area hub
- Carmarthenshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Felinfoel: your questions answered
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Which areas do you work in?
All of Carmarthenshire, and the rest of the UK. There is no extra charge for travel.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Do you come to Felinfoel?
Yes, we do. Technicians travel to Felinfoel from across the region, and the price is the same as everywhere else.
Honest limits
A repair is not right for every job, including:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Materials we work on in Felinfoel
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Do not use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Covering Felinfoel
Felinfoel is about 1 mile north of Llanelli, in Carmarthenshire. Jobs in Felinfoel are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover all 195 towns and villages in Carmarthenshire.
All of SA14 and SA15 is covered. From Salem Road, Llethri Road and Y Fron or a nearby road, we can come to you. Close by, we cover Swiss Valley (1 mile north-east), Five Roads (3 miles north-west), Llannon (4 miles north), Pontyberem (6 miles north) and Y Tymbl (6 miles north). Within a short drive, we also cover Carmarthen (13 miles north-west), Ammanford (9 miles north-east), Burry Port (5 miles west), Betws (9 miles north-east), Pembrey and Burry Port Town (5 miles west) and Achddu (5 miles west).
Around Felinfoel
Typical jobs here are in homes near Bryngwyn Comprehensive School, St. John Lloyd and White Lion pub, among other places. Also close by are Church of The Holy Trinity (within half a mile south) and Dafen Primary School (0.8 miles south-east). The closest station to Felinfoel is Llanelli station, about 2 miles south. Further afield, we also cover the area around Prince Philip Hospital (0.7 miles south-east) and Parc Howard Museum (1 mile south-west). Green spaces nearby include WWT Llanelli Wetland Centre and Pen Cornhwrdd.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why choose Surface Doctor in Felinfoel
- Same prices wherever you are
- A fixed quote before booking
- Typically one visit, start to finish
- Honest advice, even when it means no job
Read our prices page or bath cost comparison.
Places near Felinfoel
Also in Felinfoel
Do you need bath re-enamelling in Felinfoel?
Often the bath has just had decades of use. The body of the bath is typically perfectly sound.
Clients generally contact us about:
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Before booking anyone
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
- What happens if they find more damage
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
