Carmarthenshire · Wales
Bath Re-enamelling for Swiss Valley homes
Damaged bath in Swiss Valley? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
FAQs for Swiss Valley
How do I get a price for bath re-enamelling in Swiss Valley?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your SA14 postcode.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Do you work in Swiss Valley?
We do. We send a technician to Swiss Valley for every job, and the price is the same as everywhere else.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Bath re-enamelling at your home in Swiss Valley
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s brown or grey marks that don’t clean off and an original cast iron bath that needs restoring, we can help.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Where
- Swiss Valley (SA14, SA15)
- County
- Carmarthenshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Swiss Valley
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Send us a picture if you notice any of these:
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Questions to ask before booking
- How to care for the finish
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs immediately
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
Get a quote
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
What a repair can’t fix
We won’t take on work that won’t last, so these are the limits:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- What kind of damage it is
- How many areas need work
- The colour and finish to match
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- A picture taken from further back
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
For a price in Swiss Valley, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Places near Swiss Valley
More services for Swiss Valley
Work for landlords and builders
We work for landlords, letting agents and housing providers in Swiss Valley as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
If you manage property in Swiss Valley, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Our work in Swiss Valley
Swiss Valley is about 1 mile north of Box, in Carmarthenshire. Our technicians come to customers in Swiss Valley, so there’s no workshop to go to. Swiss Valley is one of 195 places in Carmarthenshire where we work.
Our visits in SA14 and SA15 are booked in the same way as anywhere else. We regularly work on streets such as Llethri Road, Danylan and Oaklands and the roads around them. We also cover the places around Swiss Valley: Felinfoel (1 mile south-west), Five Roads (3 miles north-west), Llannon (4 miles north), Pontyberem (6 miles north) and Y Tymbl (6 miles north). Within a short drive, we also cover Carmarthen (13 miles north-west), Ammanford (9 miles north-east), Burry Port (5 miles west), Betws (9 miles north-east), Pembrey and Burry Port Town (6 miles west) and Achddu (5 miles west).
Around Swiss Valley
Typical jobs here are in homes near Tafarn-y-Felin pub, Dafen Primary School and Church of The Holy Trinity, among other places. Also close by are Bryngwyn Comprehensive School (0.6 miles south) and St. John Lloyd (1.1 miles south). Swiss Valley’s nearest station is Llanelli station, roughly 2.3 miles south-west. A little further out are Prince Philip Hospital (0.8 miles south) and Llanelli New Castle (1.9 miles south-west). Green spaces nearby include Pen Cornhwrdd and WWT Llanelli Wetland Centre.
About our accreditations · Every repair comes with a one-year guarantee.
