Doncaster · England

Bath re-enamelling & resurfacing in Fenwick, Doncaster

Damaged bath in Fenwick? We repair it in place, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • Wear marks under the taps
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Fenwick

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Use washing-up liquid and a soft cloth
  • Wash away dyes and oils after use
  • Do not leave a chip unrepaired
  • Avoid suction-cup mats

Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

Bath re-enamelling in Fenwick without replacing anything

After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s brown or grey marks that don’t clean off and a coating lifting around the plughole, we can help.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Location
Fenwick (DN6)
Area hub
Doncaster
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Signs you need bath re-enamelling in Fenwick

Frequently the bath has just had decades of use. The body of the bath is usually perfectly sound.

Look out for these signs:

  • Enamel that is lost its shine and feels rough
  • A peeling or bubbling previous coating
  • Lots of chips and rust spots
  • Wear marks under the taps

What to look for in a quote

  • How changes to the job are handled
  • When it can be used again
  • What aftercare is recommended
  • A fixed quote, and whether VAT is included

Choosing a repair company

Prices and what affects them

Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:

  • Unusual colours or finishes
  • The material
  • What kind of damage it is
  • Access to the area

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from photos

When you take your pictures, a few simple things make all the difference:

  • One sharp close-up of the damage
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • Natural light rather than flash

If you are in Fenwick and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

Repairing versus replacing in Fenwick

Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface without moving it. Prices start from £350. Our prices are the same across the UK, with no extra for Fenwick. The job itself decides the price: how much damage, what it’s made of and how many items.

Why Fenwick clients choose us

  • Colours mixed by hand to suit your surface
  • Every repair guaranteed for a year
  • Normally one visit, start to finish
  • Work done at your home or business

See our full price list and guide to resurfacing and replacement costs.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair cannot fix:

  • Leaks from fittings rather than the bath
  • Acrylic that moves when you stand in it
  • A bath that is rusted through

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths

FAQs for Fenwick

How long is the bath unusable?

Most baths are done in a day, ready the following day. We’ll confirm timings when we quote.

Are there extra charges for Fenwick?

No. Our quotes include travel, with the same prices everywhere we work.

Is repairing better than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Someone resurfaced my bath and it’s peeling. Can you help?

Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will there be fumes?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

How do I get a price for bath re-enamelling in Fenwick?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Covering Fenwick

Fenwick is about 6 miles north-east of Adwick le Street, in Doncaster. We visit homes and businesses in Fenwick and nearby villages, so there is no workshop to go to. Fenwick is one of 89 towns and villages in Doncaster we cover. We work right across the region, from Fenwick to Leeds (about 22 miles away).

Here we cover the DN6 postcode area. You will find streets such as Fenwick Common Lane, Lawn Lane and Shaw Lane. Neighbouring places we cover include Moss (1 mile south), Balne (2 miles north), Haywood (2 miles south), Askern (3 miles south-west) and Norton (3 miles west). Further out, we also cover Doncaster (8 miles south), Adwick le Street (6 miles south-west), Thorne (6 miles east), Conisbrough (12 miles south-west), Bentley (7 miles south) and Armthorpe (7 miles south).

Near you in Fenwick

For rail, the closest station is Hensall station, roughly 4.2 miles north of the centre. For a walk, there is Thorpe Marsh Nature Reserve.

Map of Fenwick © OpenStreetMap contributors

How the visit works

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the following day.

How to prepare

  • Mention any parking restrictions or tricky access
  • Make sure the room can be ventilated
  • Mention any earlier repairs or resurfacing

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.

Send pictures for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.