Doncaster · England

Bath re-enamelling & resurfacing in Moss, Doncaster

Bath re-enamelling in Moss without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Moss

Moss and the surrounding area

Moss is about 5 miles north-east of Adwick le Street, in Doncaster. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Moss is one of 89 towns and villages in Doncaster where we work. We work right across the region, from Moss to Leeds (22 miles away).

Every address in DN6 is within our area. We regularly work on streets such as Moss Road, London Lane and Pinfold Lane and the roads around them. We also cover the places around Moss: Fenwick (1 mile north), Haywood (1 mile south-west), Askern (2 miles west), Sutton (3 miles west) and Balne (3 miles north). Within a short drive, we also cover Doncaster (7 miles south), Adwick le Street (5 miles south-west), Thorne (6 miles east), Conisbrough (11 miles south-west), Bentley (6 miles south) and Armthorpe (6 miles south).

What’s near Moss

We visit homes around Church of All Saints, among other places. Moss’s nearest station is Hatfield & Stainforth station, about 3.9 miles south-east of the centre. Not far away are Thorpe Marsh Nature Reserve.

Map of Moss © OpenStreetMap contributors

Bath re-enamelling at your home in Moss

Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Whether it’s worn patches where water runs and sits and lots of chips and rust spots, we can help.

Every repair is covered by our one-year guarantee.

Location
Moss (DN6)
County
Doncaster
Guarantee
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

How to care for the repair

Once the work has cured, treat it gently:

  • A quick wipe after use keeps limescale away
  • Clean with a soft cloth and mild detergent
  • Get any chip repaired quickly
  • Wash away dyes and oils after use

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

What we cannot put right

A repair is not right for every job, for example:

  • Steel that has corroded right through
  • Acrylic that moves when you stand in it
  • Leaks from fittings rather than the bath

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops

Work for landlords and builders

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

What bath re-enamelling costs

Resurfacing from £350. There’s no charge for travel to Moss. The price depends on:

  • The material and finish
  • The colour and finish to match
  • How easy the damage is to reach
  • How much damage there is

Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

You can take the photos on your phone. Just ensure we can see:

  • Natural light rather than flash
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates
  • The material, if you know it

The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Questions from Moss

Do you cover the whole of Doncaster?

All of Doncaster, and the rest of the UK. Travel is included in the price.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

Is a repair better than a new one?

Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Are there extra charges for Moss?

No. Our quotes include travel, and we charge the same wherever you are.

Do you work in Moss?

Yes, we do. Repair technicians travel to Moss from across the region, with no extra charge for travel.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Do you need bath re-enamelling in Moss?

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Keep an eye out for any of the following:

  • Wear marks under the taps
  • An old resurfacing that is failing
  • A bath that stays dull however much you clean it
  • Brown or grey marks that don’t clean off

Comparing quotes

  • Whether they match the colour on site
  • What prep work is covered
  • How long the guarantee is and what it covers
  • Who will actually do the work

Our hiring checklist

What happens on the day

There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to the best part of a day, tidy-up included.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work
  • Move bottles, mats and clutter away from the area

How to get a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.