North Ayrshire · Scotland
Bath re-enamelling & resurfacing in Fergushill, North Ayrshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Fergushill. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that is failing
FAQs for Fergushill
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
What areas do you cover?
The whole UK, including all of North Ayrshire. Just include your postcode and we will confirm dates.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How long does re-enamelling take?
One day for most baths, ready the next day. We give you timings with the quote.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Bath re-enamelling in Fergushill, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We are frequently asked to fix staining under the taps and around the waste and a roll-top that’s seen better days, across basins & shower trays, pressed steel baths and acrylic baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Fergushill (KA13)
- County
- North Ayrshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Get a quote
If you’re in Fergushill and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Landlord and trade work in Fergushill
Housing associations and facilities teams use us for planned and reactive repairs in North Ayrshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Also near Fergushill
More services for Fergushill
What a repair cannot fix
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Fergushill
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- No extra charge for your area
- Rooms protected and left tidy
See our prices page or guide to resurfacing and replacement costs.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- How much damage there is
- What kind of damage it is
We charge the same wherever you are, with no extra for Fergushill. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A picture taken from further back
- What it’s made of, if you know
Email us photos of the damage and one of the whole item, and tell us you are in Fergushill, and we’ll come back with a fixed quote.
About Fergushill
Fergushill is about 2 miles east of Kilwinning, in North Ayrshire. Wherever you are in the KA13 postcode area, we come to you. We work in 53 places across North Ayrshire. We work right across the region, from Fergushill to Glasgow (about 20 miles away).
We cover every part of KA13 and the streets around it. Other places close to Fergushill include Benslie (1 mile south-east), Lawthorn (2 miles south-east), Perceton (2 miles south-east), Irvine (2 miles south) and Girdle Toll (3 miles south). We also work in nearby towns such as Saltcoats (5 miles west), Largs (13 miles north-west), Ardrossan (6 miles west), Stevenston (4 miles west), Kilbirnie (7 miles north) and West Kilbride (8 miles west).
Near you in Fergushill
We visit homes around Irvine Royal Academy and the streets around them. The nearest railway station is Kilwinning station, about 2.2 miles west of the centre. Nearby you’ll also find Kilwinning Heritage Centre (1.7 miles west) and Eglinton Castle (1 mile south-west). Not far away are Stevenston Loch.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs right away
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
