North Ayrshire · Scotland
Bath re-enamelling & resurfacing in Stevenston, North Ayrshire
Bath re-enamelling in Stevenston without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
- A bath split right through the body
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
How we handle bath re-enamelling in Stevenston
The bath stays where it is, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. If you’re dealing with wear marks under the taps and a roll-top that’s seen better days, we can help, whatever the material.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Stevenston (KA20)
- County
- North Ayrshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Don’t use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Repair technicians who travel to you, UK-wide
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- Colour-matched on site
Take a look at our full price list and guide to resurfacing and replacement costs.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- How many areas need work
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Quotes from your pictures
Most quotes are done from photos alone. To make it quick:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Stevenston and the surrounding area
Stevenston is about 4 miles west of Irvine, in North Ayrshire. Wherever you are in the KA20 postcode area, we carry out the work at your property. Stevenston is one of 53 places in North Ayrshire where we work. We work right across the region, from Stevenston to Glasgow (about 24 miles away).
All of KA20 is covered. Streets in the area include Main Street, Station Road and Gilmour Gardens, and we cover them all. Stevenston sits on or near the A738 and B752, so getting to you is simple. Close by, we cover Auchenharvie (1 mile west), Ardeer (1 mile south-east), Saltcoats (1 mile west), Kilwinning (2 miles north-east) and Ardrossan (2 miles west). Larger places within reach include Irvine (4 miles east), Largs (12 miles north-west), Kilbirnie (8 miles north), West Kilbride (5 miles north-west), Beith (9 miles north-east) and Dalry (5 miles north). As one of the bigger places in North Ayrshire, Stevenston is somewhere we visit frequently.
Landmarks near Stevenston
Our customers here include homes close to Stevenston, Auchenharvie Academy and Glencairn Primary School. You’ll also find Stevenston Beach (0.9 miles south-west) and Champion Shell Inn (under half a mile west). The nearest railway station is Stevenston station, roughly 0.5 miles south of the centre. Nearby you’ll also find Woodland View (2.9 miles east) and Kilwinning Rangers history museum (1.2 miles north-east). The countryside around Stevenston includes Stevenston Loch.
Common problems we fix in Stevenston
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Customers generally contact us about:
- Stains that won’t shift
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Lots of chips and rust spots
Comparing quotes
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
- How to care for the finish
- How your room will be protected
Nearby places to Stevenston
What else we do in Stevenston
Stevenston questions
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Do you come to Stevenston?
Yes, we do. Repair technicians travel to Stevenston from across the region, with no extra charge for travel.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What happens once I’ve sent photos?
We come back with a fixed price. You are under no obligation.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How it works
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
