North Ayrshire · Scotland
Bath Re-enamelling in Kilwinning
Local bath re-enamelling for Kilwinning: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in North Ayrshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bath re-enamelling in Kilwinning without replacing anything
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We work on Victorian roll-tops, basins & shower trays and pressed steel baths, and the jobs we see most are a dull, rough surface that won’t come clean and staining under the taps and around the waste.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Kilwinning (KA13)
- Area hub
- North Ayrshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Kilwinning. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Repair technicians who travel to you, UK-wide
- Same prices wherever you are
- A year’s guarantee on all work
- No need to remove anything
Read our full price list and bath cost comparison.
Kilwinning and nearby
Kilwinning is about 3 miles north-west of Irvine, in North Ayrshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Kilwinning is one of 53 places in North Ayrshire where we work. You can also see our page for Glasgow, about 22 miles away.
Our visits in KA13 are booked in the same way as anywhere else. We regularly work on streets such as Garden Square Lane, Main Street and Wentworth Square. Kilwinning sits on or near the A737 and A738, so getting to you is simple. Nearby, we also work in Fergushill (2 miles east), Stevenston (2 miles south-west), Ardeer (2 miles south-west), Benslie (2 miles east) and Auchenharvie (3 miles south-west). Further out, we also cover Irvine (3 miles south-east), Saltcoats (3 miles west), Largs (12 miles north-west), Ardrossan (4 miles west), Kilbirnie (7 miles north) and West Kilbride (7 miles north-west). Being one of North Ayrshire’s larger places, Kilwinning is somewhere we visit often.
Landmarks near Kilwinning
In Kilwinning, that means homes near Kingsway Bar, Kilwinning Academy and Kilwinning and the streets around them. Kilwinning has its own railway station: Kilwinning station. Well-known places in the area include Eglinton Castle (1.5 miles south-east) and Kilwinning Heritage Centre (less than half a mile east). For a walk, there’s Stevenston Loch.
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Get a quote
To get a price, send a couple of pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Read more
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price depends on:
- The material
- How easy the damage is to reach
- What kind of damage it is
- How many items we do on one visit
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
You can generally get a fixed price without us visiting. To make it quick:
- A close-up of the damage, in focus
- Natural light rather than flash
- Your postcode, so we can check dates
- A wider photo showing the whole bath
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Do you need bath re-enamelling in Kilwinning?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Send us a photo if you notice any of these:
- A roll-top that is seen better days
- Stains that will not shift
- Several chips and rust patches
- Wear marks under the taps
Questions to ask before you book
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- Who turns up on the day
- How changes to the job are handled
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Do not leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Towns and villages near Kilwinning
What else we do in Kilwinning
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Questions from Kilwinning
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How long will the bath be out of use?
Usually one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
About our accreditations · Every repair comes with a one-year guarantee.
