South Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Ferniegair, South Lanarkshire
Local bath re-enamelling for Ferniegair: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that won’t shift
- An old resurfacing that is failing
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Free fixed quotes from pictures
- Work done at your home or business
- We leave the room as we found it
- One price list for the whole UK
Take a look at our pricing and resurfacing vs replacement cost guide.
Bath re-enamelling in Ferniegair without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We are frequently asked to fix an outdated colour you’d like to change and a dull, rough surface that won’t come clean, on pressed steel baths, basins & shower trays and acrylic baths.
All our work is covered by a one-year guarantee, wherever you are in South Lanarkshire.
- Location
- Ferniegair (ML3)
- Region
- South Lanarkshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Keep suction mats out of the bath
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a full day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
Preparing for the visit
- Point us to the nearest place to park
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
When we would advise against a repair
We will always be straight with you, so here’s what a repair cannot fix:
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Materials we work on in Ferniegair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Landlords, agents and businesses in Ferniegair
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Ferniegair. What changes the price is:
- Where the damage is and how we get to it
- The type of damage
- What the surface is made of
- The colour and finish to match
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Details of any past repairs
- A clear, close picture of the problem area
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Towns and villages near Ferniegair
More services for Ferniegair
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Questions from Ferniegair
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How long will the bath be out of use?
Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Ferniegair and nearby
Ferniegair is about 2 miles east of Hamilton, in South Lanarkshire. From the centre of Ferniegair to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover all 139 towns and villages in South Lanarkshire. We work right across the region, from Ferniegair to Glasgow (about 12 miles away).
Postcode districts we cover here: ML3. From Carlisle Road, Isabella Gardens and Riccarton Path or anywhere nearby, a technician can come to you. If you are just outside Ferniegair, we cover Allanton (1 mile south-east), Barncluith (1 mile west), Earnock (2 miles south-west), Avongrove (2 miles south-west) and Meikle Earnock (2 miles south-west). Further out, we also cover East Kilbride (7 miles west), Cambuslang (6 miles north-west), Uddingston (5 miles north-west), Blantyre (4 miles north-west), Larkhall (3 miles south-east) and Carluke (7 miles east).
Near you in Ferniegair
Typical jobs here are in homes near Ferniegair Mission Church, Dalziel High School and Duchess of Hamilton Park, among other places. There’s a railway station in Ferniegair itself: Chatelherault station. Further afield, we also cover the area around Regent Shopping Centre (1.1 miles north-west) and University Hospital Wishaw (2.6 miles east). Open spaces near Ferniegair include Baron's Haugh RSPB Reserve and Strathclyde Loch.
About our accreditations · Every repair comes with a one-year guarantee.
