Oxfordshire · England
Bath re-enamelling & resurfacing in Fewcott, Oxfordshire
Damaged bath in Fewcott? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Respect the curing time we give you
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our bath re-enamelling in Fewcott
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are an outdated colour you’d like to change and worn patches where water runs and sits.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Fewcott (OX27)
- Region
- Oxfordshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly.
Materials we work on in Fewcott
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Our work in Fewcott
Fewcott is about 4 miles north-west of Bicester, in Oxfordshire. Across the OX27 area, a technician comes to you. Our technicians cover 443 places in Oxfordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 46 miles away.
All of OX27 is within our area. Local streets include Water Lane, Somerton Road and Ardley Road. If you are just outside Fewcott, we cover Ardley (1 mile south-east), Fritwell (1 mile north-west), Upper Heyford (2 miles south-west), Souldern (3 miles north-west) and Middleton Stoney (3 miles south). Larger places within reach include Oxford (13 miles south), Banbury (10 miles north-west), Bicester (4 miles south-east), Kidlington (9 miles south), Headington Quarry (13 miles south) and Bure Park (3 miles south-east).
Local landmarks in Fewcott
Our customers here include homes close to Church of St Mary and White Lion pub and the streets around them. The closest station to Fewcott is Bicester North station, roughly 4 miles south-east. Further afield, we also cover the area around Bicester Community Hospital (4.2 miles south-east) and Ardley Castle (under half a mile south).
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- The material
- Unusual colours or finishes
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
Two or three clear pictures are typically enough. It helps if you send:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Something in shot to show the size
- One picture of the entire bath
If you’re in Fewcott and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we’re done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Do you need bath re-enamelling in Fewcott?
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Clients usually contact us about:
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
What your quote should include
- How long it needs to cure
- Whether the price covers travel
- Whether the colour is mixed to match
- Aftercare advice
Common questions in Fewcott
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
How do I get a price for bath re-enamelling in Fewcott?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Towns and villages near Fewcott
Other services in Fewcott
About our accreditations · Every repair comes with a one-year guarantee.
