Leicestershire · England
Bath re-enamelling & resurfacing in Fleckney, Leicestershire
Bath re-enamelling in Fleckney without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
Bath re-enamelling in Fleckney without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on Victorian roll-tops, basins & shower trays and pressed steel baths, and people most frequently call us about brown or grey marks that don’t clean off and an old resurfacing that’s failing.
Every job is backed for twelve months in Fleckney and everywhere else. If something goes wrong with the work, we come back.
- Where
- Fleckney (LE8)
- County
- Leicestershire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Fleckney and the surrounding area
Fleckney is about 4 miles south-east of Wigston, in Leicestershire. Our technicians come to clients in Fleckney and nearby villages, so you don’t need to take anything anywhere. Fleckney is one of 287 towns and villages in Leicestershire we cover. You can also see our page for Birmingham, about 36 miles away.
Every address in LE8 is covered, from the main roads to the quietest streets. Streets in the area include High Street, Main Street and School Street. Other places close to Fleckney include Saddington (1 mile south-east), Wistow (2 miles north), Smeeton Westerby (2 miles east), Arnesby (2 miles west) and Shearsby (2 miles south-west). Within a short drive, we also cover Hinckley (14 miles west), Wigston (4 miles north-west), Syston (11 miles north), Lutterworth (9 miles south-west), Blaby (6 miles north-west) and Broughton Astley (7 miles west).
What’s near Fleckney
Typical jobs here are in homes near Church of St Nicholas, Fleckney Church of England Primary School and The Kibworth School and the streets around them. Further afield, we also cover the area around Wigston Folk Museum (3.8 miles north-west) and Kibworth Harcourt Castle (2.1 miles east).
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before booking. We look at:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How easy the damage is to reach
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- One picture of the entire bath
- A clear, close picture of the problem area
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Also near Fleckney
What else we do in Fleckney
Your questions about bath re-enamelling in Fleckney
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Aftercare tips
How the surface is treated afterwards matters:
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
When a repair isn’t the answer
We will not take on work that will not last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
What we are called out for in Fleckney
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things clients generally mention when they call are:
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
- An outdated colour you’d like to change
What your quote should include
- Aftercare advice
- What happens if they find more damage
- How long the guarantee is and what it covers
- How the colour is matched
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Everything repaired in place
Read our prices page and resurfacing vs replacement cost guide.
The process
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
How to get a price
Upload pictures of the damage and a wider shot of the whole item, with your LE8 postcode, and we will reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
