Leicestershire · England
Bath chip & crack repair in Fleckney, Leicestershire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Fleckney. Free, fixed quotes from your photos.
- Repairs from £95
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon, tidy-up included.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Point us to the nearest place to park
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
Bath repair in Fleckney, done in place
Most of our bath repairs take a few hours, and you can normally bathe again the day after. There’s no need to book a plumber or tiler, because the bath doesn’t move. We regularly repair cast iron enamel, whirlpool & spa baths and acrylic, and the jobs we see most are a chip where the taps sit and a hole punched through by something heavy.
All our work comes with our one-year guarantee, wherever you are in Leicestershire.
- Area
- Fleckney (LE8)
- County
- Leicestershire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Fleckney
Other services in Fleckney
Your questions about bath repair in Fleckney
Do you cover the whole of Leicestershire?
Across the UK, so Fleckney is covered. Prices don’t change with location.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How much does bath repair cost in Fleckney?
Repairs from £95. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Covering Fleckney
Fleckney is about 4 miles south-east of Wigston, in Leicestershire. Our technicians come to homes and businesses in Fleckney and the surrounding area, so you do not need to take anything anywhere. Fleckney is one of 287 places in Leicestershire we cover. Our nearest city page is Birmingham, about 36 miles away.
Jobs in LE8 are booked in the same way as anywhere else. Local streets include High Street, Main Street and School Street, and we cover them all. Close by, we cover Saddington (1 mile south-east), Wistow (2 miles north), Smeeton Westerby (2 miles east), Arnesby (2 miles west) and Shearsby (2 miles south-west). Within a short drive, we also cover Hinckley (14 miles west), Wigston (4 miles north-west), Syston (11 miles north), Lutterworth (9 miles south-west), Blaby (6 miles north-west) and Broughton Astley (7 miles west).
What’s near Fleckney
In Fleckney, that means homes near Church of St Nicholas, Fleckney Church of England Primary School and The Kibworth School. Well-known places in the area include Wigston Folk Museum (3.8 miles north-west) and Kibworth Harcourt Castle (2.1 miles east).
Keeping it looking good
How the surface is treated afterwards matters:
- Don’t scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
- Have new chips seen to early
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Fleckney
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
What affects the price in Fleckney
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- The material and finish
- What kind of damage it is
- How many areas need work
- Doing more than one item at once
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Any details about the material
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Do you need bath repair in Fleckney?
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
You may need us if you’ve spotted any of these:
- Chips on the rim or sides
- Rust by the waste and overflow
- Scuffs and scratches in the surface
- Snagging damage from a refit
Questions to ask before you book
- What happens if they find more damage
- Whether a trained technician does the job
- How soon you can use it again
- How to look after the finish
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams in Leicestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
