Buckinghamshire · England
Bath Re-enamelling in Fleet Marston
Full bath re-enamelling and resurfacing at your home in Fleet Marston, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
How we handle bath re-enamelling in Fleet Marston
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include thin, worn enamel in places and a peeling or bubbling previous coating, across basins & shower trays, pressed steel baths and acrylic baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Fleet Marston (HP18)
- Area hub
- Buckinghamshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether old repairs or coatings need taking off
- The material
- The size and number of damaged areas
- How hard the colour is to match
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Quotes from your photos
Phone photos are fine. Just make sure we can see:
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Where we work around Fleet Marston
Fleet Marston is about 2 miles north-west of Aylesbury, in Buckinghamshire. Anywhere in HP18, we carry out the work at your property. Fleet Marston is one of 263 places in Buckinghamshire we cover. We work right across the region, from Fleet Marston to London (about 40 miles away).
All of HP18 is within our area, from the main roads to the quietest streets. Other places close to Fleet Marston include Haydon Hill (1 mile south-east), Quarrendon Estate (2 miles east), Fairford Leys (2 miles south-east), Stone (2 miles south) and Hartwell (2 miles south). Larger places within reach include High Wycombe (15 miles south), Chesham (14 miles south-east), Buckingham (12 miles north-west), Elmhurst (3 miles east), Southcourt (3 miles south-east) and Princes Risborough (8 miles south).
What’s near Fleet Marston
Our clients here include homes close to St Mary's Church, Green Ridge Primary Academy and Buckinghamshire UTC and the streets around them. Fleet Marston has its own railway station: Aylesbury Vale Parkway station. Other landmarks nearby include Roald Dahl Children's Gallery (2.5 miles south-east) and Friars Square (2.6 miles south-east).
Nearby places to Fleet Marston
Other services in Fleet Marston
Questions from Fleet Marston
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you cover Fleet Marston?
Yes. We cover the whole UK and come to Fleet Marston. Send pictures and we’ll quote, or call 0345 017 0787.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
How much does bath re-enamelling cost in Fleet Marston?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- A bath split right through the body
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Fleet Marston
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Signs you need bath re-enamelling in Fleet Marston
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
People typically call us when they notice something like this:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
Before you book anyone
- A fixed quote, and whether VAT is included
- What prep work is covered
- The length of the guarantee and what it covers
- How the room is protected while they work
How to care for the repair
So the finish stays in good condition:
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
The process
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day for most jobs. We leave the room clean and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
How to get a price
Upload a photo of the damage and one of the entire item, with your HP18 postcode, and we will come back with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
