Lancashire · England
Bath Re-enamelling for Fleetwood homes
Problem with your bath in Fleetwood? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Worn patches where water runs and sits
Fleetwood and nearby
Fleetwood is about 7 miles north of Blackpool, in Lancashire. Whether you are in the middle of Fleetwood or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 482 towns and villages across Lancashire. We work right across the region, from Fleetwood to Liverpool (about 35 miles away).
Jobs in FY7 work the same way as everywhere else we cover. Jobs here include addresses on Station Road, Rutland Avenue and Eastwood Avenue and the roads around them. Main roads around Fleetwood include the A585 and A587, so getting to you is simple. Neighbouring places we cover include Rossall (1 mile south), Knott End-on-Sea (2 miles north-east), Cleveleys (2 miles south), Preesall (3 miles east) and Thornton (3 miles south). We also work in nearby towns such as Lancaster (13 miles north-east), Lytham St Anne's (11 miles south), Morecambe (13 miles north-east), Heysham (11 miles north-east), Poulton-le-Fylde (5 miles south) and St Annes (11 miles south).
Local landmarks in Fleetwood
Our clients here include homes close to St Nicholas' Church, Fleetwood High School and The Mount pub. A little further out are Fleetwood Hospital (1.1 miles north-east) and Affinity Lancashire (0.6 miles east).
Bath re-enamelling in Fleetwood without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for chips and rust in more than one place and worn patches where water runs and sits, across acrylic baths, pressed steel baths and cast iron baths.
All of our repairs are guaranteed for twelve months in Fleetwood and everywhere else. If something goes wrong with the work, we come back.
- Area
- Fleetwood (FY7)
- Region
- Lancashire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Clear the area around the damage
- Let the surface dry out before the visit
- Have a window or extractor fan available
How to get a price
For a price in Fleetwood, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
FAQs for Fleetwood
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a picture of the entire item and your postcode.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
What else we do in Fleetwood
What we cannot put right
It helps to know what we can’t do too:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Landlords, agents and businesses in Fleetwood
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Do you need bath re-enamelling in Fleetwood?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
It’s worth getting a quote if you see:
- A roll-top that is seen better days
- Wear marks under the taps
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Questions to ask before you book
- Who turns up on the day
- What happens if they find more damage
- How the colour is matched
- What aftercare is recommended
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Prices start from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- We will tell you if it’s not worth repairing
- No extra charge for your area
- Fixed prices from your pictures
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or resurfacing vs replacement cost guide.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
