Trafford · England
Bath re-enamelling & resurfacing in Flixton, Trafford
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Flixton. Free, fixed quotes from your photos.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Several chips and rust patches
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our bath re-enamelling in Flixton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for thin, worn enamel in places and several chips and rust patches, in Victorian roll-tops, cast iron baths and acrylic baths.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Flixton (M41, M31)
- County
- Trafford
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Open a window if you can
- Tell us about any previous repairs or coatings
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Where we work around Flixton
Flixton is about 1 mile south-west of Urmston, in Trafford. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Flixton is one of 25 towns and villages in Trafford we cover. You can also see our page for Manchester, about 7 miles away.
We cover every part of the M41 and M31 postcode area and the streets around it. That includes homes on Devon Road, Vale Avenue and Reigate Road and the roads around them. We also cover the places around Flixton: Carrington (1 mile south), Urmston (1 mile north-east), Davyhulme (1 mile north-east), Ashton upon Mersey (2 miles east) and Peel Green (2 miles north). Within a short drive, we also cover Sale (3 miles south-east), Altrincham (4 miles south-east), Broadheath (3 miles south-east), Stretford (3 miles east), Hale (5 miles south-east) and Partington (3 miles south-west).
Local landmarks in Flixton
In Flixton, that means homes near Wellacre Technology Academy, The Roebuck pub and St Michael's CofE (Aided) Primary School. There’s a railway station in Flixton itself: Flixton station. A little further out are Monks Hall (3.5 miles north-east) and Trafford Centre (2.3 miles north-east). For a walk, there’s Birch Moss Covert Nature Reserve and Unicorn Grocery.
- Parks and local facilities nearby include Municipal Borough of Sale (2.8 miles south-east)
FAQs for Flixton
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How much does bath re-enamelling cost in Flixton?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your M41 postcode.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do you need bath re-enamelling in Flixton?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Most people contact us after spotting something like this:
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
- Several chips and rust patches
- A coloured bath you want in white
What to look for in a quote
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- How the room is protected while they work
- How long the guarantee is and what it covers
Looking after it afterwards
Once the work has cured, treat it gently:
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Have chips seen to early
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Also near Flixton
What else we do in Flixton
Landlord and trade work in Flixton
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
What affects the price in Flixton
Prices start from £350. You’ll know the full cost before you book. We take into account:
- Access to the area
- Doing more than one item at once
- How many areas need work
- Unusual colours or finishes
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Repairing versus replacing in Flixton
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Colour mixed on the day to match
- Fixed prices from your pictures
- Same prices wherever you are
- Nothing taken out or refitted
Take a look at our prices page or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
