Powys · Wales

Bath Re-enamelling in Forden

Problem with your bath in Forden? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Forden

Bath re-enamelling in Forden, done in place

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and common reasons people contact us are several chips and rust patches and enamel that’s lost its shine and feels rough.

All of our repairs are guaranteed for twelve months in Forden and everywhere else. If something goes wrong with the work, we come back.

Where
Forden (SY21)
County
Powys
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old basin refinished to bright white

Your questions about bath re-enamelling in Forden

Are there extra charges for Forden?

Travel is included in the price, with the same prices everywhere we work.

Will the new finish last?

Care for it and it lasts. Gentle cleaning, no suction mats.

Is there a smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Do you cover Forden?

Yes, we do. Technicians travel to Forden from across the region, with no extra charge for travel.

What if the damage is worse than the pictures show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Can a failed resurfacing be redone?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

How it works

We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take most of the day.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can typically be used the day after.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Mention if the room is upstairs or in a flat
  • Clear the area around the damage

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Send photos for a quote

Related advice

Why repair rather than replace?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

What you get with us

  • CHAS, Constructionline and SafeContractor accredited
  • A year’s guarantee on all work
  • Work done at your home or business
  • Colour-matched on site

See our full price list and bath cost comparison.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

For landlords and businesses

Landlords, letting agents and housing providers in Forden use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Dry the bath after use to stop limescale
  • Get any chip repaired quickly
  • Leave the bath for the full curing time before using it
  • Keep suction mats out of the bath

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

When we would advise against a repair

Before you book, it’s worth knowing the limits too:

  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back
  • A poorly supported acrylic bath, until it’s firmed up

Not sure? Send pictures and we will give you a straight answer before you book.

Surfaces we repair

  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths

Our work in Forden

Forden (Welsh: Ffordun) is about 11 miles north-east of Y Drenewydd, in Powys. Our technicians come to homes and businesses in Forden and nearby villages, so you don’t need to take anything anywhere. We cover all 234 towns and villages across Powys. You can also see our page for Birmingham, about 53 miles away.

All of SY21 is within our area. Whether you live on Withy Avenue, Waterloo Fields and Heatherwood or a nearby road, we can come to you. Forden sits on or near the B4388, which makes travel easy. Close by, we cover Leighton (2 miles north), Belan (2 miles north-west), Llwynderw (2 miles west), Brithdir (3 miles west) and Tre'r llai (3 miles north). Further out, we also cover Y Drenewydd (11 miles south-west), Newtown and Llanllwchaiarn (10 miles south-west), Y Trallwng (3 miles north), Penygloddfa (11 miles south-west), Pen-y-Glodfa (10 miles south-west) and Bron-y-Buckley (4 miles north).

Near you in Forden

Around Forden, we work in homes near Cock Hotel. Forden’s nearest station is Welshpool station, roughly 3 miles north. Nearby you’ll also find Powys Castle Museum (2.8 miles north-west) and Victoria Memorial Hospital (3.3 miles north). Green spaces nearby include Llyn Coed-y-Dinas and Long Mountain.

Map of Forden © OpenStreetMap contributors

Signs you need bath re-enamelling in Forden

Hard water speeds up the wear, and abrasive cleaners do the most damage.

It’s worth getting a quote if you see:

  • A bath that stays dull however much you clean it
  • Chips and rust in more than one place
  • Worn patches where water runs and sits
  • Stains that won’t shift

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • How long the guarantee is and what it covers
  • Aftercare advice
  • What happens if they find more damage

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.