Isle of Anglesey · Wales
Bath Re-enamelling for Four Mile Bridge homes
Fixed-price bath re-enamelling in Four Mile Bridge and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that do not clean off
How we handle bath re-enamelling in Four Mile Bridge
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include a roll-top that’s seen better days and a bath that stays dull however much you clean it, in acrylic baths, pressed steel baths and Victorian roll-tops.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Area
- Four Mile Bridge (LL65)
- County
- Isle of Anglesey
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes most of the day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- Any earlier repairs or coatings
- Where you are, by postcode
- A clear, close picture of the problem area
- The material, if you know it
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Common questions in Four Mile Bridge
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and we’ll quote them together.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Which areas do you work in?
The whole UK, including all of Isle of Anglesey. Just include your postcode and we’ll offer you dates.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Do you come to Four Mile Bridge?
Yes, we do. We send a technician to Four Mile Bridge for every job, with no extra charge for travel.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Looking after it afterwards
Looking after the surface is easy:
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Where we work around Four Mile Bridge
Four Mile Bridge (Welsh: Pont-rhyd-y-bont) is about 3 miles south-east of Holyhead, in Isle of Anglesey. Customers in Four Mile Bridge get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Four Mile Bridge is one of 115 places in Isle of Anglesey where we work. Our nearest city page is Liverpool, about 69 miles away.
Postcode districts we cover here: LL65. Streets in the area include Ffordd Caradoc, Lon Cedric and Heol Bradwen, and we cover them all. We also travel to Valley (1 mile north-east), Caergeiliog (2 miles east), Llanfair-yn-Neubwll (2 miles east), Penrhyn (2 miles east) and Llanfihangel yn Nhowyn (3 miles east). Within a short drive, we also cover Holyhead (3 miles north-west), Blackbridge (3 miles north-west), Porth-y-Felin (4 miles north-west), Llangefni (11 miles east), Stryd (3 miles north-west) and Pont-Hwfa (4 miles north-west).
Landmarks near Four Mile Bridge
We visit homes around Anchorage Hotel, Ysgol Gymuned Fali and St Michael's Church and the streets around them. For rail, the closest station is Valley station, about 1 mile north-east. Nearby you will also find Caer Gybi (3.4 miles north-west) and Ysbyty Penrhos Stanley (2.6 miles north-west). The countryside around Four Mile Bridge includes Valley Wetlands and Llyn Treflesg.
Signs you need bath re-enamelling in Four Mile Bridge
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Clients normally contact us about:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
Before you book anyone
- Is the price fixed, and does it include VAT?
- What prep work is covered
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
Places near Four Mile Bridge
Also in Four Mile Bridge
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Prices start from £350. We charge the same wherever you are, so there is no premium for Four Mile Bridge. The job itself decides the price: the material, the amount of damage and how many items.
Why Four Mile Bridge customers choose us
- No need to remove anything
- One price list for the entire UK
- CHAS and Constructionline accredited
- Fixed prices from your pictures
Take a look at our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
