Isle of Anglesey · Wales

Bath chip & crack repair in Four Mile Bridge, Isle of Anglesey

Damaged bath in Four Mile Bridge? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • A hole punched through by something heavy
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Four Mile Bridge?

Common questions in Four Mile Bridge

What happens if you find more damage?

Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.

Is the work guaranteed?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Will the repair show?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

When can I have a bath again?

Typically the day after. We confirm the time before we leave.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one.

Do you charge for travel?

We do not add a call-out fee. Your fixed price includes everything.

Can you quote from photos?

In nearly every case. If pictures don’t show enough, we will ask for another angle.

Bath repair in Four Mile Bridge without replacing anything

Most of our bath repairs take a few hours, and you can usually bathe again the following day. There is no need to book a plumber or tiler, because the bath does not move. If you are dealing with deep scratches in acrylic and hairline or through cracks in acrylic, we can generally put it right, whatever the material.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Four Mile Bridge (LL65)
Area hub
Isle of Anglesey
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

How we price bath repair

Repairs from £95. We price every job individually. The main factors are:

  • How easy the damage is to reach
  • How many items we do on one visit
  • How hard the colour is to match
  • Any earlier repairs that need removing first

Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

How to get a fixed price

Good photos mean an accurate price. Here’s what we find most useful:

  • Where you are, by postcode
  • A coin beside the damage so we can judge size
  • A photo taken from further back
  • Natural light rather than flash

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Should you replace it?

A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why Four Mile Bridge customers choose us

  • Work done at your home or business
  • Nothing taken out or refitted
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work

See our full price list or guide to resurfacing and replacement costs.

Common problems we fix in Four Mile Bridge

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

People typically call us when they notice something like this:

  • Damage beneath the taps
  • An old repair that has yellowed or come loose
  • A hole punched through by something heavy
  • Rusty patches near the plughole

Questions to ask before booking

  • Whether there are any call-out or travel charges
  • When it can be used again
  • What happens if they find more damage
  • Whether a trained technician does the job

Our hiring checklist

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Looking after it afterwards

Looking after the surface is easy, and it makes a real difference:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Keep abrasive pads and gritty cleaners away from the bath
  • Put a towel in the bath if you’re working above it
  • Keep metal cans and razors off the surface

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.

How it works

We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Mention any earlier repairs or resurfacing
  • Open a window if you can

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Related advice

Covering Four Mile Bridge

Four Mile Bridge (Welsh: Pont-rhyd-y-bont) is about 3 miles south-east of Holyhead, in Isle of Anglesey. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We cover all 115 towns and villages in Isle of Anglesey. Our jobs stretch from Four Mile Bridge to Liverpool (69 miles away).

We cover every part of the LL65 postcode area and the streets around it. Jobs here include addresses on Ffordd Caradoc, Lon Cedric and Heol Bradwen and the roads around them. Close by, we cover Valley (1 mile north-east), Caergeiliog (2 miles east), Llanfair-yn-Neubwll (2 miles east), Penrhyn (2 miles east) and Llanfihangel yn Nhowyn (3 miles east). We also work in nearby towns such as Holyhead (3 miles north-west), Blackbridge (3 miles north-west), Porth-y-Felin (4 miles north-west), Llangefni (11 miles east), Stryd (3 miles north-west) and Pont-Hwfa (4 miles north-west).

Landmarks near Four Mile Bridge

We visit homes around Anchorage Hotel, Ysgol Gymuned Fali and St Michael's Church and the streets around them. Four Mile Bridge’s nearest station is Valley station, about 1 mile north-east of the centre. Other landmarks nearby include Caer Gybi (3.4 miles north-west) and Ysbyty Penrhos Stanley (2.6 miles north-west). The countryside around Four Mile Bridge includes Valley Wetlands and Llyn Treflesg.

Map of Four Mile Bridge © OpenStreetMap contributors

When we’d advise against a repair

In fairness, some problems need a different fix:

  • Acrylic cracks with no access behind them
  • Wear across the entire surface, which needs re-enamelling
  • A steel bath rusted through

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.