East Sussex · England
Bath Re-enamelling in Framfield
We travel to Framfield for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Bath re-enamelling at your home in Framfield
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for a bath that stays dull however much you clean it and an original cast iron bath that needs restoring, in cast iron baths, pressed steel baths and Victorian roll-tops.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Framfield (TN22)
- Area hub
- East Sussex
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Framfield: your questions answered
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Do you come to Framfield?
We do. We send a technician to Framfield for every job, and the price is the same as everywhere else.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up and a photo of the whole item and your postcode.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Avoid suction-cup mats
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- A year’s guarantee on all work
- One visit for most repairs
- Colours mixed by hand to suit your surface
- One price list for the whole UK
Read our prices page or resurfacing vs replacement cost guide.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
When a repair is not the answer
We won’t take on work that will not last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Towns and villages near Framfield
More services for Framfield
What we’re called out for in Framfield
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Signs it’s time to call us include:
- A roll-top that is seen better days
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- A coating lifting around the plughole
Comparing quotes
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
- What happens if they find more damage
- When it can be used again
Framfield and the surrounding area
Framfield is about 1 mile east of Uckfield, in East Sussex. Whether you’re in the middle of Framfield or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Framfield is one of 289 places in East Sussex where we work. Our jobs stretch from Framfield to London (about 38 miles away).
Here we cover the TN22 postcode area. Local streets include The Street, Preston Grove and Framelle Mount, and we cover them all. If you’re just outside Framfield, we cover Etchingwood (1 mile north-east), Uckfield (1 mile west), Blackboys (1 mile east), Potter's Green (2 miles north) and Buxted (2 miles north). Further out, we also cover Eastbourne (14 miles south-east), Seaford (13 miles south), Lewes (8 miles south-west), Hailsham (9 miles south-east), Crowborough (6 miles north) and Newhaven (12 miles south).
Local landmarks in Framfield
We visit homes around Hempstead Meadow, Hare & Hounds pub and Framfield Church of England Primary School and the streets around them. Other local landmarks include St Thomas à Becket Church (less than half a mile south-west) and Uckfield College (1.4 miles north-west). For rail, the closest station is Uckfield station, about 1.6 miles west of the centre. Further afield, we also cover the area around Uckfield Community Hospital (1.2 miles west) and Tickerage Castle (0.8 miles east). For a walk, there’s Selwyns Wood.
What happens on the day
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes the best part of a day in most cases. We leave the room clean and you’ll know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Getting a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We will say straight away whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
