Kent · England
Bath Re-enamelling in Frinsted
Full bath re-enamelling and resurfacing in Frinsted, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Frinsted
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Whether it’s a coating lifting around the plughole and a period or roll-top bath worth keeping, we can typically put it right, whatever the material.
Every repair comes with a one-year guarantee.
- Area
- Frinsted (ME9)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Nearby places to Frinsted
Other services in Frinsted
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- How hard the colour is to match
- How easy the damage is to reach
- What the surface is made of
- Whether old repairs or coatings need taking off
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
You can usually get a fixed quote without us visiting. To make it quick:
- Any details about the material
- A coin or ruler next to the damage for scale
- A picture taken from further back
- Your postcode, so we can check dates
For a price in Frinsted, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Where we work around Frinsted
Frinsted is about 4 miles south of Sittingbourne, in Kent. Whether you are in the middle of Frinsted or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Frinsted is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 37 miles away.
We work across the ME9 postcode area. You will find streets such as The Street, Bottom Pond Road and Dray's Field, all of which we cover. Other places close to Frinsted include Milstead (1 mile north-east), Hollybushes (2 miles east), Bluetown (2 miles east), Wichling (2 miles east) and West Street (2 miles south-east). We also work in nearby towns such as Maidstone (8 miles west), Ashford (12 miles south-east), Sittingbourne (4 miles north), Whitstable (15 miles east), Faversham (8 miles east) and Minster (10 miles north-east).
Near you in Frinsted
Typical jobs here are in homes near Milstead and Frinsted Church of England Primary School, The Blacksmith's Arms Public House and St Giles, among other places. Frinsted’s nearest station is Harrietsham station, about 3 miles south-west of the centre. Well-known places in the area include Leeds Castle (4 miles south-west) and Laundry Museum (3.8 miles south-west).
Landlords, agents and businesses in Frinsted
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
When we would advise against a repair
To be straight with you, there are a few things a repair will not fix:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
How to care for the repair
After the repair has cured, a few habits help it last:
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Frinsted questions
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you need bath re-enamelling in Frinsted?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- Wear marks under the taps
- Several chips and rust patches
- Stains that won’t shift
- A peeling or bubbling previous coating
What to look for in a quote
- Whether they match the colour on site
- What the guarantee covers, and for how long
- How the room is protected while they work
- What prep work is covered
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Let the surface dry out before the visit
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
