Kent · England
Bath re-enamelling & resurfacing in Minster, Kent
Full bath re-enamelling and resurfacing for homes and businesses in Minster and across Kent. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that is failing
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Bath re-enamelling in Minster without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix wear marks under the taps and chips and rust in more than one place, on pressed steel baths, basins & shower trays and acrylic baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Minster (ME12)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- We leave the room as we found it
- No need to remove anything
- One price list for the entire UK
- A fixed quote before you book
See our pricing or bath cost comparison.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- The colour and finish to match
- Access to the area
- Whether we combine several jobs
- What the surface is made of
Our prices are the same across the UK, with no extra for Minster. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
You can typically get a fixed quote without us visiting. To help us price it:
- Details of any past repairs
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
Most customers in Minster get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Minster and nearby
Minster is about 6 miles north-east of Sittingbourne, in Kent. Our technicians come to customers in Minster and the surrounding area, so there is no workshop to go to. Minster is one of 922 towns and villages in Kent we cover. We work right across the region, from Minster to London (39 miles away).
Here we cover the ME12 postcode area. Local streets include High Street, Lapwing Close and Copland Avenue, all of which we cover. Being close to the A2500 and B2008, Minster is simple for us to get to. Nearby, we also work in Halfway Houses (1 mile west), Sheerness (2 miles north-west), Queenborough (2 miles west), Eastchurch (3 miles east) and Rushenden (3 miles west). We also work in nearby towns such as Canterbury (15 miles south-east), Sittingbourne (6 miles south-west), Whitstable (11 miles south-east), Faversham (8 miles south-east), Herne Bay (15 miles east) and Davington (8 miles south-east).
Near you in Minster
Locally, our jobs take us to homes close to Barton's Point Coastal Park, The Abbey Church Of St Mary And St Sexburga and Leigh Academy Minster and the streets around them. Nearby too are Thistle Hill Academy (within half a mile south-west) and Oasis Academy Isle of Sheppey (0.8 miles west). For rail, the closest station is Queenborough station, about 2.3 miles west of the centre. A little further out are Minster Gatehouse Museum (under half a mile north-east) and Castle Rough (4.5 miles south-west).
Signs you need bath re-enamelling in Minster
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Send us a picture if you notice any of these:
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether the price is fixed and includes VAT
- What happens if they find more damage
- Aftercare advice
- Who turns up on the day
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Landlords, letting agents and housing providers in Minster use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Before we arrive
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Related advice
Nearby places to Minster
Other services in Minster
Minster questions
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We give you timings with the quote.
How much does bath re-enamelling cost in Minster?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
