Gloucestershire · England
Bath Re-enamelling in Frocester
Bath re-enamelling across Frocester and nearby, usually in one visit.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
When we’d advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Bath re-enamelling in Frocester without replacing anything
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the following day. Whether it’s enamel that’s lost its shine and feels rough and thin, worn enamel in places, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Frocester (GL10)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Frocester
Frocester is about 4 miles west of Stroud, in Gloucestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Frocester is one of 470 places in Gloucestershire we cover. Our nearest city page is Birmingham, about 54 miles away.
All of GL10 is covered, from the main roads to the quietest streets. From Bath Road and Peter's Street or a nearby road, a technician can come to you. Nearby, we also work in Silver Street (1 mile south), Coaley (1 mile south-west), Eastington (1 mile north), Churchend (2 miles north) and Nastend (2 miles north). We also work in nearby towns such as Cheltenham (15 miles north-east), Gloucester (9 miles north), Stroud (4 miles east), Cirencester (15 miles east), Lansdown (15 miles north-east) and Brockworth (10 miles north-east).
Around Frocester
Around Frocester, we work in homes near Maidenhill School, Coaley School and Church of St Andrew, among other places. The closest station to Frocester is Stonehouse station, about 1.9 miles north-east. A little further out are Standish Hospital (2.9 miles north-east) and Drakestone Camp (4.5 miles south-west). Not far away are Woodchester Park and Coaley Peak.
Questions from Frocester
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens after I send photos?
You’ll get a fixed quote back. You’re under no obligation.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
When to call us in Frocester
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a picture:
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
- A roll-top that’s seen better days
Before booking anyone
- Whether they match the colour on site
- How soon you can use it again
- Whether cleaning and preparation are in the price
- How to care for the finish
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Open a window if you can
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Related advice
What affects the price in Frocester
Resurfacing from £350. We charge the same across the UK, including Frocester. What changes the price is:
- Doing more than one item at once
- What kind of damage it is
- What the surface is made of
- How hard the colour is to match
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- Natural light rather than flash
- The postcode, so we can plan the visit
- One sharp close-up of the damage
If you’re in Frocester and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Frocester. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Frocester customers choose us
- One visit for most repairs
- Fixed prices from your pictures
- Same prices wherever you are
- Technicians who travel to you, UK-wide
See our full price list and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Looking after it afterwards
To keep it looking its best for years:
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Do not leave a chip unrepaired
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Towns and villages near Frocester
Other services in Frocester
About our accreditations · Every repair comes with a one-year guarantee.
