Wrexham · Wales
Bath re-enamelling & resurfacing in Fron, Wrexham
Fixed-price bath re-enamelling in Fron and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Bath re-enamelling in Fron without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair pressed steel baths, Victorian roll-tops and cast iron baths, and the jobs we see most are chips and rust in more than one place and brown or grey marks that don’t clean off.
Every repair comes with our one-year guarantee, wherever you are in Wrexham.
- Where
- Fron (LL11)
- County
- Wrexham
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Fron
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Covering Fron
Fron is about 3 miles north-west of Offa, in Wrexham. Clients in Fron get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Fron is one of 115 places in Wrexham where we work. We work right across the region, from Fron to Liverpool (25 miles away).
Jobs in LL11 are booked in the same way as anywhere else. We also cover the places around Fron: Tanyfron (1 mile north-east), Coedpoeth (1 mile south-west), Southsea (1 mile east), Gegin (1 mile west) and Brynteg (1 mile east). Larger places within reach include Wrexham (3 miles east), Caia Park (4 miles east), Offa (3 miles south-east), Rhosllannerchrugog (4 miles south), Rhosddu (3 miles east) and Acton (3 miles east).
Near you in Fron
Around Fron, we work in homes near Ysgol Bryn Alyn, Tanyfron C.P. School and Red Lion Inn. Other local landmarks include Church of St Peter (1.2 miles east) and Nant Mill (1.2 miles south). Fron’s nearest station is Gwersyllt station, roughly 2 miles north-east of the centre. Nearby you’ll also find Cae Twmpath Fieldname 2 (less than half a mile south-east) and Tŷ Pawb (3.1 miles east). For a walk, there is Pen-rhos and Brymbo Pool.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Looking after it afterwards
Nothing complicated is needed:
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Don’t leave a chip unrepaired
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which generally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Open a window if you can
Getting a price
Most customers in Fron get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repairing versus replacing in Fron
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
See our full price list and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The material
- Whether we combine several jobs
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- Any details about the material
- One sharp close-up of the damage
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Other services in Fron
About our accreditations · Every repair comes with a one-year guarantee.
