Wrexham · Wales
Bath chip & crack repair in Fron, Wrexham
Damaged bath in Fron? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Impact holes in acrylic
- A failed DIY repair that is discoloured or lifting
How we handle bath repair in Fron
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. Common call-outs are for hairline or through cracks in acrylic and damage beneath the taps, across acrylic, cast iron enamel and roll-top & freestanding.
Big or small, you get the same one-year guarantee in Fron and across Wrexham.
- Where
- Fron (LL11)
- Region
- Wrexham
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a morning or an afternoon. We leave the room clean.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the next day.
Before we arrive
- Keep children and pets away from the room on the day
- Clear the area around the damage
- Open a window if you can
Get a quote
Email us pictures of the damage and one of the whole item, and tell us you’re in Fron, and we will reply with a fixed quote.
Read more
What else we do in Fron
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Fron
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
Read our full price list or bath cost comparison.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
About Fron
Fron is about 3 miles north-west of Offa, in Wrexham. Wherever you are in the LL11 postcode area, we carry out the work at your property. We work in 115 places in Wrexham, from the larger towns to small villages. Our jobs stretch from Fron to Liverpool (about 25 miles away).
We cover every part of the LL11 postcode area. We also travel to Tanyfron (1 mile north-east), Coedpoeth (1 mile south-west), Southsea (1 mile east), Gegin (1 mile west) and Brynteg (1 mile east). Larger places within reach include Wrexham (3 miles east), Caia Park (4 miles east), Offa (3 miles south-east), Rhosllannerchrugog (4 miles south), Rhosddu (3 miles east) and Acton (3 miles east).
Local landmarks in Fron
Around Fron, we work in homes near Ysgol Bryn Alyn, Tanyfron C.P. School and Red Lion Inn, among other places. Other local landmarks include Church of St Peter (1.2 miles east) and Nant Mill (1.2 miles south). Fron’s nearest station is Gwersyllt station, roughly 2 miles north-east of the centre. Other landmarks nearby include Cae Twmpath Fieldname 2 (within half a mile south-east) and Tŷ Pawb (3.1 miles east). Not far away are Pen-rhos and Brymbo Pool.
How we price bath repair
Repairs from £95. Prices are worked out job by job. What matters most is:
- How many areas need work
- The colour and finish to match
- The material
- Previous DIY repairs that have to come out
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- The material, if you know it
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Your questions about bath repair in Fron
How long does the repair take to cure?
Usually within a day, depending on the repair.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
Is there any odour?
Expect a mild smell while we’re working.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I get a price for bath repair in Fron?
Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Signs you need bath repair in Fron
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
People usually call us when they notice one of these:
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
- Rust by the waste and overflow
- Cracks in an acrylic bath
Questions to ask before booking
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- What prep work is covered
- How your room will be protected
What a repair can’t fix
It helps to know what we can’t do:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
