Gwynedd · Wales
Bath re-enamelling & resurfacing in Frongoch, Gwynedd
Full bath re-enamelling and resurfacing in Frongoch, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- An outdated colour you’d like to change
Bath re-enamelling in Frongoch, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Our technicians work on cast iron baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about a period or roll-top bath worth keeping and wear marks under the taps.
Every repair is covered by a one-year guarantee, wherever you are in Gwynedd.
- Where
- Frongoch (LL23)
- Region
- Gwynedd
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Frongoch
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Why book with us
- Straight answers about what a repair can do
- Every repair guaranteed for a year
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
See our prices page or resurfacing vs replacement cost guide.
Also near Frongoch
Other services in Frongoch
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- The material and finish
- The size and number of damaged areas
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- The material, if you know it
- A close-up of the damage, in focus
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
What a repair cannot fix
We won’t take on work that will not last, so these are the limits:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes most of the day. The room is left tidy.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Do you need bath re-enamelling in Frongoch?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Common reasons people in Frongoch contact us include:
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
- Several chips and rust patches
- A roll-top that is seen better days
Before you book anyone
- Who will actually do the work
- How the room is protected while they work
- How to look after the finish
- How soon you can use it again
How to look after the repair
How the surface is treated afterwards matters:
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
FAQs for Frongoch
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
How much does bath re-enamelling cost in Frongoch?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover the whole of Gwynedd?
All of Gwynedd, and the rest of the UK. There is no extra charge for travel.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Frongoch and nearby
Frongoch is about 25 miles south of Bae Colwyn, in Gwynedd. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Frongoch is one of 165 places in Gwynedd where we work. You can also see our page for Liverpool, about 44 miles away.
Our repair technicians cover all of the LL23 postcode area and the streets around it. Other places close to Frongoch include Y Bala (3 miles south-east), Llanycil (3 miles south), Llangower (4 miles south), Llandderfel (5 miles east) and Llanuwchllyn (6 miles south). Further out, we also cover Blaenau Ffestiniog (13 miles west), Ffestiniog (13 miles west), Glan-y-pwll (14 miles west) and Bethania (13 miles west).
Around Frongoch
Typical jobs here are in homes near Ysgol Bro Tryweryn, among other places. A little further out are Mary Jones World (2.8 miles south) and Pen-uchar llan (2.7 miles south-east). The countryside around Frongoch includes Craig y Garn and Llyn y Fawnog.
About our accreditations · Every repair comes with a one-year guarantee.
