North Ayrshire · Scotland
Bath Re-enamelling in Fullarton
Full bath re-enamelling and resurfacing in Fullarton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that do not clean off
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Bath re-enamelling at your home in Fullarton
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, with the bath ready to use the following day. Our repair technicians work on acrylic baths, pressed steel baths and cast iron baths, and common reasons people get in touch are thin, worn enamel in places and a roll-top that’s seen better days.
We stand behind the work with a one-year guarantee.
- Location
- Fullarton (KA12, KA11)
- Region
- North Ayrshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Fullarton
What else we do in Fullarton
Signs you need bath re-enamelling in Fullarton
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Keep an eye out for any of the following:
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- Wear marks under the taps
- Several chips and rust patches
What to look for in a quote
- Whether a trained technician does the job
- Whether they match the colour on site
- If travel is included in the price
- How changes to the job are handled
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why us?
- Fixed prices from your photos
- Colour mixed on the day to match
- We leave the room as we found it
- Nothing taken out or refitted
Take a look at our pricing and bath cost comparison.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- What kind of damage it is
- How many items we do on one visit
- The size and number of damaged areas
- Unusual colours or finishes
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- Any details about the material
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Fullarton and nearby
Fullarton is about 1 mile south-west of Irvine, in North Ayrshire. Jobs in Fullarton are booked in like any other job: a fixed quote from photos, then a visit to do the work. Fullarton is one of 53 places in North Ayrshire we cover. You can also see our page for Glasgow, about 23 miles away.
Every address in KA12 and KA11 is within our area. Streets in the area include Scott Road, High Street and Harbour Road, all of which we cover. Neighbouring places we cover include Girdle Toll (1 mile north), Irvine (1 mile north-east), Broomlands (1 mile east), Lands of Broomlands (1 mile east) and Bourtreehill (2 miles east). Further out, we also cover Kilwinning (3 miles north-west), Saltcoats (5 miles north-west), Largs (15 miles north-west), Ardrossan (6 miles north-west), Stevenston (4 miles north-west) and Kilbirnie (10 miles north).
Around Fullarton
We visit homes around Greenwood Academy, The Auld Brig pub and Irvine Royal Academy and the streets around them. Fullarton has its own railway station: Irvine station. Other landmarks nearby include Seagate Castle (0.6 miles north) and Ayrshire Central Hospital (1.8 miles north). Not far away are Stevenston Loch.
Questions from Fullarton
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How long does re-enamelling take?
One day for most baths, ready the day after. We’ll confirm timings when we quote.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
