Lincolnshire · England
Bath Re-enamelling for Fulstow homes
Bath re-enamelling across Fulstow and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Fulstow
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on cast iron baths, Victorian roll-tops and pressed steel baths, and common reasons people get in touch are wear marks under the taps and an original cast iron bath that needs restoring.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Fulstow (LN11)
- Region
- Lincolnshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
To keep it looking its best for years:
- Dry the bath after use to stop limescale
- Never use suction bath mats
- Repair dripping taps early
- Don’t leave a chip unrepaired
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Fulstow and nearby
Fulstow is about 6 miles north of Louth, in Lincolnshire. Customers in Fulstow get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Fulstow is one of 732 towns and villages in Lincolnshire where we work. You can also see our page for Leeds, about 68 miles away.
Our repair technicians cover all of the LN11 postcode area and the streets around it. That includes homes on Main Street, Casswell Crescent and Northway. Nearby, we also work in Covenham St Bartholomew (1 mile south-east), Covenham St Mary (2 miles south), Ludborough (2 miles south-west), North Cotes (2 miles north-east) and North Thoresby (2 miles west). Further out, we also cover Louth (6 miles south), New Waltham (5 miles north-west), Mablethorpe (13 miles south-east), Humberston (6 miles north), Sutton on Sea (15 miles south-east) and Market Rasen (14 miles west).
What’s near Fulstow
Around Fulstow, we work in homes near Church of St Lawrence and Fulstow Community Primary School. A little further out are County Hospital Louth (5.8 miles south).
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Same prices wherever you are
Take a look at our prices page and guide to resurfacing and replacement costs.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What we are called out for in Fulstow
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Most people get in touch after spotting one of these:
- A coloured bath you want in white
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
What your quote should include
- How changes to the job are handled
- What aftercare is recommended
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
Your questions about bath re-enamelling in Fulstow
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
How do I get a price for bath re-enamelling in Fulstow?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Does re-enamelling smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Also near Fulstow
What else we do in Fulstow
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
How to get a price
If you’re in Fulstow and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
What affects the price in Fulstow
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- How easy the damage is to reach
- The colour and finish to match
- Any earlier repairs that need removing first
- The type of damage
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
You can usually get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
