Lincolnshire · England

Bath Re-enamelling for Covenham St Mary homes

Damaged bath in Covenham St Mary? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Covenham St Mary

Prices and what affects them

Prices start from £350. We do not charge extra for travel to Covenham St Mary. The price depends on:

  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes
  • Access to the area
  • What kind of damage it is

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

How to get a fixed price

You can take the photos on your phone. Ensure they show:

  • The material, if you know it
  • Natural light rather than flash
  • A photo taken from further back
  • Details of any past repairs

Most customers in Covenham St Mary get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Bath re-enamelling in Covenham St Mary without replacing anything

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on Victorian roll-tops, pressed steel baths and acrylic baths, and the jobs we see most are wear marks under the taps and a dull, rough surface that won’t come clean.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Covenham St Mary (LN11)
Area hub
Lincolnshire
Cover
12 months on all our work
Price
From £350. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Signs you need bath re-enamelling in Covenham St Mary

Frequently the bath has just had decades of use. The body of the bath is normally perfectly sound.

Look out for these signs:

  • Wear marks under the taps
  • A bath that stays dull however much you clean it
  • A peeling or bubbling previous coating
  • Chips and rust in more than one place

What your quote should include

  • Whether cleaning and preparation are in the price
  • How changes to the job are handled
  • How your room will be protected
  • If travel is included in the price

Choosing a repair company

For landlords and businesses

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.

What a repair cannot fix

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • A bath that’s rusted through
  • A metal bath with a through crack
  • Plumbing leaks, which need a plumber

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays

Covenham St Mary and nearby

Covenham St Mary is about 4 miles north of Louth, in Lincolnshire. We travel to homes and businesses in Covenham St Mary, so nothing has to leave your home. Covenham St Mary is one of 732 towns and villages in Lincolnshire where we work. We work right across the region, from Covenham St Mary to Leeds (69 miles away).

Every address in LN11 is covered, from the main roads to the quietest streets. Streets in the area include Main Road, Newbridge Lane and Ings Lane, and we cover them all. If you are just outside Covenham St Mary, we cover Covenham St Bartholomew (1 mile north), Yarburgh (1 mile south-east), North End (2 miles south-east), Utterby (2 miles west) and Fulstow (2 miles north). Within a short drive, we also cover Louth (4 miles south), New Waltham (7 miles north-west), Mablethorpe (12 miles south-east), Humberston (7 miles north), Sutton on Sea (14 miles south-east) and Market Rasen (15 miles west).

Near you in Covenham St Mary

Our customers here include homes close to Church of St Mary and The New Plough pub and the streets around them. Other landmarks nearby include County Hospital Louth (4.1 miles south).

Map of Covenham St Mary © OpenStreetMap contributors

Repairing versus replacing in Covenham St Mary

A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Covenham St Mary

  • Free fixed quotes from pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • Nothing taken out or refitted
  • Repair technicians who travel to you, UK-wide

Read our pricing or bath cost comparison.

Your questions about bath re-enamelling in Covenham St Mary

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Will the bath be moved?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

What happens once I’ve sent pictures?

We come back with a fixed price. You’re under no obligation.

Will the new finish last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What we do, step by step

Arrival times are agreed in advance, so you are not left guessing. On site, it takes the best part of a day for most jobs. We leave the room clean and you’ll know when it can be used.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Clear the area around the damage
  • Keep children and pets away from the room on the day
  • Make sure the area is dry

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

Send photos for a quote

Read more

Repairs by material

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

How to care for the repair

Much of the damage we repair could have been avoided. These habits help:

  • Clean with a soft cloth and mild detergent
  • Don’t leave bottles, razors or sponges standing on the surface
  • Dry the bath after use to stop limescale
  • Leave the bath for the full curing time before using it

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.